Electronics Forum | Wed Feb 29 06:33:49 EST 2012 | amitsindwani
Please define the defect in following conditions & link to IPC 610 clause/sub-clause no.: 1. 0603 component placed on 0805 PCB pad 2. 0805 component placed on 0603 PCB pad 3. 1206 component placed on 1210 PCB pad and 4. 1210 component placed on 1206
Electronics Forum | Mon Jul 22 18:46:57 EDT 2013 | jorge_quijano
I've seen the Pick n Place immediatly after the Screen Printer, but they have a good 2D inspection, so the really do not need an operator to inspect or remove any PCB before the Pick n Place, if you have a good Printer I will not foresee any problem
Electronics Forum | Mon Jun 05 14:37:55 EDT 2017 | stevezeva
At a past employer we stacked caps and resistors quite regularly. As some have suggested a dispensable paste was used and dispensed by hand and then the stack was placed. At first it was placed by hand, but then we were able to program our Mydata to
Electronics Forum | Fri Jul 12 15:41:32 EDT 2024 | ktm250rider
Im trying to program our JUKI KE750e I have 6 components to place. The machine places the first 3 but then ends the program. Ive tried saving the program and deleting the 3 that are placed, and the machine will place the other 6. However, if i add
Electronics Forum | Wed May 23 10:12:32 EDT 2001 | richf
We're close to receive an assy including one VHDM connector, I'd like to receive any info to be able to place this part properly, and if possible, to know if there is any automatic equipment to place them
Electronics Forum | Thu Aug 16 08:08:11 EDT 2001 | forrge
Looking for feedback from people that used the Fuji CP6 to place 0201 parts. Is the CP642 reliable? I have been told that the Fuji CP642 cannot reliably place the 0201's and the CP643 must be used.
Electronics Forum | Fri Apr 25 09:17:47 EDT 2003 | Adam
We will soon be taking our first steps to place 0402's using a Europlacer Progress 6 pick & place machine.Even though the machine is rated at placing these chips, I was wondering if anyone has any practical experience and are prepared to share their
Electronics Forum | Wed Jan 14 14:58:21 EST 2004 | Gilroy Misquita
I would like to know if there is an International standard for BGA and QFP polarity in trays for pick and place. How are these components placed on trays and is there a polarity of the tray itself? Please feel free to send me an email or reply on t
Electronics Forum | Wed Nov 29 01:20:44 EST 2006 | fastek
Guess- If a component drops at the camera the machine will not proceed to attempt to place it and drive the nozzle into a brick of solder paste. The line sensor will catch the fact there is no component on the nozzle and will retry to pick and place.
Electronics Forum | Fri Mar 23 07:34:11 EDT 2007 | davef
Cost per placement = [Equipment cost/5 years/components placed per year] + [Working capital/ components placed per year] + [Expenses/components placed per year]
.gif)
