Electronics Forum | Wed May 05 09:23:11 EDT 2004 | InterConn
Hi ACE, I design with a Minimum of 0.40mm Body to Body on 0805 Chip size down for hi volumne products, 0.60mm would be preferred. Regards I/C
Electronics Forum | Tue Oct 18 03:34:48 EDT 2022 | sarason
Use PCBSynergy to do the file conversion to the machines you have and then use Ealead "Programming" to do the optimization. https://pcbsynergy.com https://ealead-e.ucoz.com/index/products/0-8 sarason
Electronics Forum | Wed Aug 26 09:02:35 EDT 2020 | sarason
This program will read a large number of modern machine formats and export to the same set of formats, as well as feeder movement, machine optimisation and up to 6 different manufacturers machines in the one line. And it only caosts $1000US. https:/
Electronics Forum | Mon Nov 20 19:49:03 EST 2006 | davef
Sorry for stating this incorrectly. It should been: Bow & twist for bare boards and panels: IPC-A-610 Acceptability of Electronic Assemblies, 10.6: 1.5% for PTH only and 0.75% for SMT, acording to test method TM-650, method 2.4.22 IPC-6012, par. 3.
Electronics Forum | Tue Nov 07 10:43:25 EST 2006 | muse95
Also, have you considered the possibility that if you solder on an existing joint on a board that was built with SnPb solder, even though you are using leadfree solder wire, you would now contaminate the tip of your soldering iron. If you then start
Electronics Forum | Tue Sep 20 14:36:53 EDT 2022 | sarason
Have you considered using PCBSYynergy for the CAD conversion and bypass the gerber step. Then add in Programming by Ealead. https://ealead-e.ucoz.com/index/products/0-8 https://pcbsynergy.com This ends the breaking of QC by bypassing human process
Electronics Forum | Wed Aug 02 05:25:01 EDT 2017 | pandamw
Model : PD045105-2S 50 Ohm 2 way SMA-Female Power Divider From 0.45 to 10.5 GHz Rated at 30 Watts; 10.5GHz, SMA-Female Power Divider; Insertion Loss 1.0dB; Isolation 20dB; Operating Temperature -40 to +70℃. Frequency Range | GHz : 0.45-10.5 Impeda
| 1 |
winsouce.jpg)
