Electronics Forum | Wed Feb 07 16:14:54 EST 2001 | Antonio
I've recently read a posting here which said that the person was trying to reduce solder balls. One of the things the person had done was to adjust the reflow profile so as to be hotter and longer in the reflow state. Am I wrong here? I thought th
Electronics Forum | Thu May 06 10:28:27 EDT 2004 | Bryan She
Modify your stencil aperture shape...reduce the solder paste deposited on pad,will reduce the solder balls.Be sure your reflow profile are good before doing this.rising slope is very important. This is my opinion.thanks. Bryan
Electronics Forum | Mon Jul 16 15:49:33 EDT 2001 | Steve
The solder balls you are talking about are caused by too much paste. Reduce the size of the stencil aperatures. Concerning removing the solder balls, the first thing you need to ask yourself is, do I need to remove them. IPC-610, 12.4.10 states, "Ac
Electronics Forum | Tue May 11 15:52:03 EDT 2004 | Erhan
It's been 10 years since I started to use this editing method but never knew that it was called wendy-house style. :-) This is most probably the answer you're looking for if you're only having problems around the 1206 types. For QFPs, I used to redu
Electronics Forum | Wed Feb 07 21:56:00 EST 2001 | davef
Every critter out there with large incisors adapted for gnawing and nibbling has a different theory of solder ball formation. [My theory: It�s punishment for using NC fluxes. Stand and deliver. My solder balls end-up in the gross filter connected
Electronics Forum | Thu Feb 08 09:07:22 EST 2001 | Hussman
OK, without knowing the specifics, why does everyone blame the oven? Most solder balls occur around R's and C's in almost every shop I've been to. The best place to start looking is the screen printer - not the oven. Sure the oven is the last proc
Electronics Forum | Thu Jul 12 10:32:59 EDT 2001 | Hussman
Wow, what a string of answers and nobody brought up the easiest way to eliminate solder balls. Yes, the paste being squished under the part does reflow and work it's way out to the side during reflow. I did a 5 week study on this (when I was a bori
Electronics Forum | Mon Jul 16 21:25:26 EDT 2001 | davef
Sure, use of U-shape apertures is another way to reduce the amount of paste that you apply. That and similar schemes mentioned in the article are not a function of the flux used. We have used U-shaped apertures for MELF and mini-MELF. They are sug
Electronics Forum | Fri Jun 25 09:19:12 EDT 2004 | tjensen
60-70% RH will be a challenge if you are running a water wash solder paste (and could be the reason you are seeing the problems). If you are running a no-clean, humidity should not be an issue. As long as the profile looks OK, I don't think the con
Electronics Forum | Wed Feb 28 10:00:46 EST 2001 | dason_c
Please advise what kind of the solder mask, glossy or matt? Matt finished can reduce the solder ball significant. Check Enthone, Enplate DSR Series. Good Luck!
