Electronics Forum | Thu Jul 24 10:49:12 EDT 2008 | slthomas
100 CFM at each exhaust if you're using room air, 25 CFM/ea if you're using nitrogen (according to my manual...never used nitrogen myself) per their specified delivery rates.
Electronics Forum | Tue Oct 27 18:07:39 EDT 2009 | burb1999
Have 8" metal exhaust going out the oven to the roof and no filter or flow meter. Have used a filter and flow meter before, anyone have any info on this or where to purchase the needed items? Thanx, Todd
Electronics Forum | Tue Oct 27 22:48:48 EDT 2009 | fulldrawmike
Have 8" metal exhaust going out the oven to the > roof and no filter or flow meter. Have used a > filter and flow meter before, anyone have any > info on this or where to purchase the needed > items? > > Thanx, Todd McMaster Carr has just abo
Electronics Forum | Wed Apr 10 05:29:08 EDT 2019 | SMTA-Tiberius
Hi there , We just got a 2000 litre Nitrogen tank for our Heller1809MKIII Reflow Oven , it has been installed and calibrated last week but now the Oxigen PPM doesn't drop below 3000 . Did anybody dealt with this issue before ?
Electronics Forum | Thu Jan 08 16:43:43 EST 2004 | Dean
Unless your machine (internal) thermocouples are each calibrated and compensated no two machines will deliver eactly the same results. Here are your challenges: 1. Data acquisition equipment A-D converter errors 2. PCB measurement thermocouple (t
Electronics Forum | Tue Apr 11 11:47:56 EDT 2006 | amol_kane
Hi SMTnetters, I have a white residue coating all over my reflow oven innards (almost looks like white fungus). How can I absolutely be certain that it’s flux and not anything else?are there any tests available for this? I am planning to check the ov
Electronics Forum | Mon May 24 06:04:09 EDT 2004 | johnwnz
Nitro, I msuggest you get your oven manual out and start reading!! it depends on yoru machine, the point of injection, how many zzones it's designed to cover (some only inject for reflow) what your inward flow rate is, what yoru exhaust rate is and
Electronics Forum | Thu Aug 05 12:16:15 EDT 2021 | cyber_wolf
Exposure Controls: 8.9 HF Engineering Controls: Use only with production equipment (such as stencil printers and re-flow furnaces) with adequate exhaust ventilation and other safety features specifically designed for use with solder paste. Contro
Electronics Forum | Tue Aug 13 10:26:05 EDT 2002 | lloyd
I am currently running several SMT lines that are placing components onto dispensed adhesive (Heraeus PD 944). My problem is that we have always had an issue with a resin type liquid �condensing� on the inside of our oven chimney and then running bac
Electronics Forum | Tue Apr 10 04:16:20 EDT 2012 | grahamcooper22
you are seeing a typical issue that is caused when such small volumes of paste are printed....there are several reasons for it..the tiny amount of flux in the small deposit becomes exhausted much quicker then it does in a larger deposit ( the flux ma