Electronics Forum | Thu Jul 12 10:23:30 EDT 2012 | blnorman
Check with your adhesive manufacturer. In a previous life we had one line that was either double sided reflow or wave following reflow. When it was ds reflow, we just shut off the wave. When it was reflow/wave, we kept the reflow oven on with the
Electronics Forum | Tue Feb 08 12:36:28 EST 2000 | Charlie
I'm looking for information from both those who do cure glue and reflow past with the same profile and those who have tried and decided against it. What were the problem? What are the limitations?
Electronics Forum | Tue Oct 16 18:42:32 EDT 2001 | mparker
I go with DaveF's advice. You are probably curing the glue too fast. Another phenomenon that I have experienced was during glue cure and solder paste reflow simultaeously. A good reason to run a glue cure profile seperately from solder paste reflow
Electronics Forum | Thu Oct 26 11:41:53 EDT 2023 | proceng1
We currently use Loctite 348 chipbonder to secure large parts that will hang under the board when reflowing the second side. Rework has been complaining that they sometimes have to remove those parts to make repairs and it's difficult to remove them
Electronics Forum | Wed Feb 09 21:29:28 EST 2000 | Dave F
Charlie: People cure glue using their paste reflow profile all the time. And most of them are happy. Personally, I�m with Dean and Travis. It�s possible to as you suggest, it�s appealing not to mess with your oven profile, but it just doesn�t s
Electronics Forum | Tue Feb 08 16:09:09 EST 2000 | dean
Generally speaking with most electronic grade epoxies: 1. Cure time is a function of temperature. 2. Polymer bonds begin to quickly break down above certain temperatures (product specific). I believe aprox 170-180C. The strength of the bond de
Electronics Forum | Tue Oct 16 07:00:06 EDT 2001 | genglish
Hi all, I have a problem and would gratefully take on suggestions, firstly let me explain the situation: We are currently screen printing adhesive, using a method similar to DEKs 'Pump Print', The adhesive we are currently using is supplied from Alp
Electronics Forum | Mon Mar 31 07:58:50 EDT 2008 | vinitverma
Assuming the following: L=Process Length of the oven t=Desired profile time in mins(depends on the paste/glue used) l=PCB length l1=gap between consecutive PCBs Then the total no. of PCBs per hour is" (L*60/t)/(l+l1) Vinit
Electronics Forum | Sat Jun 17 09:09:15 EDT 2000 | Chrys Shea
Contact the adhesive manufacturer, or their website. Most adhesive suppliers offer two cure options - one with a belt oven profile and one with a box oven profile. The belt oven is usually a ramp and plateau of 120-150C for approx 2 minutes. The b
Electronics Forum | Sun Apr 21 09:34:03 EDT 2002 | hany_khoga
Dear all: We need to glue some chip capacitors (0603 & 0805) before continuing the process of placing the topside SMT components. As a subcontractor we received the whole materials including the glue. After experimenting several temperature profiles
