Electronics Forum | Mon Jun 06 04:36:44 EDT 2005 | rlackey
It's not underfill is it?
Electronics Forum | Mon Jun 06 07:14:21 EDT 2005 | pci
We find it impossible to remove the glued chips > like the CPU and the UEm ICs in Nokia Mobile > Phones. They are both surface mount devices and > glued with some chemicals we think. Any help is > most needed in this matter. May we know what pr
Electronics Forum | Tue Oct 16 07:00:06 EDT 2001 | genglish
Hi all, I have a problem and would gratefully take on suggestions, firstly let me explain the situation: We are currently screen printing adhesive, using a method similar to DEKs 'Pump Print', The adhesive we are currently using is supplied from Alp
Electronics Forum | Mon Aug 21 16:37:46 EDT 2006 | davef
We too doubt that you have super glue on your BGA. If you want advice on removing super glue, look here: * http://www.supergluecorp.com/removingsuperglue.html * http://www.loctiteproducts.com/questions.asp?answerme=116
Electronics Forum | Mon Aug 21 15:02:53 EDT 2006 | FredC
If you really have Loctite Super Glue it is a cyanoacrylate and can be removed with acetone. If you have a Loctite aneorbic glue that has not hardened yet, acetone will remove it. If an anerobic has hardened I know of nothing that will remove it. Als
Electronics Forum | Thu Aug 17 09:57:16 EDT 2006 | jwn
Hi all, I need to find a solution for a problem I have. I need to replace BGAs which have been glued to a laptop board with superglue (Loctite). How can it be done without removing the pads when trying to remove the foreign glue? thanks in advance
Electronics Forum | Sat Sep 02 10:10:18 EDT 2006 | cyber_wolf
HAHAHAHA ! Did you read the section about getting super glue off lips ? How could you accidentally super glue your lips together? Funny stuff man.....
Electronics Forum | Sun Sep 03 09:50:11 EDT 2006 | davef
Se�or Tech: You mean you never stayed at a friends house and woke-up the next morning to find that they shaved your eyebrows or superglued your lips? Now, that's funny. [Well, at the time it's not always funny, but the pix are later.] Don't let th
Electronics Forum | Thu Oct 26 11:41:53 EDT 2023 | proceng1
We currently use Loctite 348 chipbonder to secure large parts that will hang under the board when reflowing the second side. Rework has been complaining that they sometimes have to remove those parts to make repairs and it's difficult to remove them
Electronics Forum | Mon Sep 11 07:36:04 EDT 2023 | tommy_magyar
See attached snippet from a datasheet: Syringe 1. Twist and remove the cap from the syringe. Do not discard cap. 2. Measure 1 part by volume of A. 3. Measure 1 part by volume of B. 4. Dispense material on a mixing surface or container, and thoroughl
.jpg)