Electronics Forum | Thu Feb 17 16:25:20 EST 2022 | mihai_voivod
I'm not understanding what roller with closed sides you are referring to. My edge roller bearing (brass color) has a lip on the side. The middle roller bearings (silver) have a slightly bigger lip. These are the roller bearing shown on the manufact
Electronics Forum | Tue Feb 08 16:48:15 EST 2000 | Rob C
Roller Tin - Has anyone ever herd of such a process for improving wave solder defects?
Electronics Forum | Thu Jun 21 12:18:47 EDT 2012 | swag
We use Hilman rollers (Hilmanrollers-mf.com) and/or pallet jacks. Printers and smaller P&P machines can be moved with pallet jacks. Large machines such as chipshooters require rollers and man power but you'd be amazed what you can push around on Hi
Electronics Forum | Fri Mar 15 08:20:06 EDT 2013 | torch
we quite often see this on our quads usually only on the 8mm feeders, sometimes the tape roller can become sticky as suggested. usually i just remove the roller and apply a grease to the screw so that it can move freely also make sure that the peel
Electronics Forum | Thu Jan 05 23:15:03 EST 2017 | teslalab2
Hi! I recently bought 33 of the worlds crappiest Quad feeders for dirt cheap. They all had bad tape peel rollers. So I decided to try and print replacement rollers from TPU. And, it actually works! here is the link to the cad files http://www.thingiv
Electronics Forum | Fri Jan 06 18:20:01 EST 2017 | sarason
AS wonderful as your experiment in 3D printing is. WOuld you have been better off taking a print feeder roller out of an inkjet , with the right diameter and cutting to size on a dropsaw! Another approach is to find a supplier in the printing indust
Electronics Forum | Wed Jul 06 07:33:08 EDT 2016 | enovak
looking for tensions rollers for wiper paper for 2000 vintage EKRA E5 screen printer
Electronics Forum | Sat Apr 04 19:17:23 EDT 2015 | sync40
Hello to everybody. Does someone have some experience or review in the past with roller tinning machines? I mean low cost machines with two rollers and a molten solder tank. The finished soldermasked PCB pass through the rollers (like a lamination)
Electronics Forum | Fri Jul 16 08:05:44 EDT 2004 | cyber_wolf
In case anyone is interested, I found a solution to the problem. The 3 nylon rollers that the overlay tape rides on have a tendency to build up crud inside them. They may appear to function correctly when there is no overlay tape pushing on them, but
Electronics Forum | Thu Jan 26 18:28:40 EST 2006 | MikeAJ
An adhesive style cleaner is primarily used as a "precleaner" for bare boards only. These machines are placed between the loader and the printer. The TekNek machines can be best compared to those disposable lint and hair rollers. The same type of rol
