Electronics Forum | Mon Jun 12 15:27:09 EDT 2023 | jamesatqkits
It was a nitrogen delivery issue. I used a funnel (silicone) to direct the nitrogen to the board. The way the machine operates is, the nitrogen comes out about 7 cm away from the board, from a large opening around the nozzle. I cut a silicone funnel
Electronics Forum | Wed Jul 02 09:22:20 EDT 2008 | dmunson
Thanks Real Chunks. We currently have an RPS opus selective solder machine that we plan on keeping. It is configured as a 3-nozzle (!) one-pump (!!) point selective solder machine w/ nitrogen preheat. Custom wet nozzles. We use lead free SN100C sold
Electronics Forum | Fri Oct 15 16:21:48 EDT 2010 | dyoungquist
Brian When we were looking into getting a selective solder system 2 years ago, I had factory tours at both RPS and ACE. We ended up choosing RPS. Not a big difference between them. The RPS system is a little easier to program in my opinion and wa
Electronics Forum | Tue Nov 23 18:59:14 EST 2021 | kumarb
Hi. To add to your homework... 1) RPS are from the former team that developed the ACE KISS product line. 2) From brief chats, NORDSON is still building the last versions of the ACE KISS designs while RPS has continued to advance the tool. 3) Anoth
1 |