Electronics Forum | Mon Jan 03 05:34:16 EST 2011 | jmw
Check in you system configuration that you dont have the opiton to use a matrix tray handler turned on. This is what i have seen cause this problem.
Electronics Forum | Fri Dec 31 12:26:29 EST 2010 | kvael
Has any one had this problem? Dynatech says it is the I/O Dpram board, sold me one that dosen't work. Bought a second Dpram from SMTBOX, still have the same original problem. During Dpram initialization error comes up "no command response from handl
Electronics Forum | Mon Dec 13 11:27:39 EST 2010 | kvael
I have a Samsung CP30V machine that when starting up gives me the error "NO COMMAND RESPONSE FROM HANDLER". Has anyone had this problem. I have replaced the I/O Dpram board, no change.
Electronics Forum | Fri Jan 07 15:09:09 EST 2011 | brianangus
Hi. Check the 5V PSU supplying the VME rack. Make sure you have 5V and not something like 3v. try removing the ISA card from the PC and try a different ISA slot in the pc. Hope this helps. Brian.
Electronics Forum | Fri Mar 11 10:51:29 EST 2005 | mfoster
Samsung Back-up pins available from Dynatech for $30 each. http://www.DynatechSMT.com
Electronics Forum | Fri Mar 11 10:00:22 EST 2005 | ???
Anybody out there know of a good (2nd) source to purchase single magnetic board supports used on quad/samsung machines. These are spring loaded and contact the underside of the board in the pick n place machine
Electronics Forum | Thu Dec 28 22:00:45 EST 2006 | Sue Kim
Hi all, I am doing some research on SMT machines. I would like as many people as possible to rate the following machines 1-6. The number 1 would be the best, number 6, the least desirable of the 6. I realize that there are dozens of factors to con
Electronics Forum | Thu Jun 16 03:25:19 EDT 2022 | leaderway0
AI/SMT spare parts and SMT equipment vendors from China-Leaderway Industrial Co., Ltd. The main distribution brands are Fuji, Samsung, Juki, Yamaha, Universal, Panasonic, Siemens, and Sony. Our websites: http://www.leadersmt.com Contact us !!! Email
Electronics Forum | Sat Jan 22 03:02:00 EST 2011 | cpcompany
Dear Sir I understand that you are having difficulty in finding the nozzles for CP30. As you know CP30 was the very first model of Samsung Techwin. At that time, I worked for Samsung Techwin as a service engineer in Korea. Now I am checking if I can
Electronics Forum | Fri Jan 21 14:02:39 EST 2011 | carvincorp
Anyone know where I can find M1 and M2 nozzles for a Samsung CP30 pick and place? I used to be able to get them from Samsung, but they don't support the machine any more.
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694
.gif)
