Electronics Forum | Thu Oct 24 23:19:55 EDT 2013 | wesleyintelli
Heads 2 & 3 on our CP45 are placing poorly. We believe that the head cameras are adjusting the component positions incorrectly since the placement is perfect when vision alignment is turned off. Does anyone have any experience with this issue or acce
Electronics Forum | Mon Oct 28 15:13:44 EDT 2013 | larrygroves
It will require an alignment. The tools are usually included in the toolbox, one L shaped magnetic tool, a small square glass plate and there is a tool in the nozzle changer. You can buy them seperately if you dont have them. There is a bigger qu
Electronics Forum | Thu Jul 30 07:25:09 EDT 2015 | buckcho
Hello, I haven't worked with such machine, but do you have a led lighting, like in cp45, which is newer? Maybe there is something wrong with it and it is not lighting up?
Electronics Forum | Fri Dec 16 15:23:04 EST 2005 | Csabee
I think the Samsung SM320 is quite good machine..But I suggest that must assembly feeder cover to the feeder trolleys, because without that the tape feeders are not safe for the heads. Feeders should broke the head. chip components wrong light sett
Electronics Forum | Sat Dec 17 15:46:28 EST 2005 | Csabee
Samsung SM320 don't have sensor for recognizing component. Only using Fly&Fix camera. In first time the korean samsung service engineer advised me (3,7light settings for chips and the machine generated many dumps, sometimes 50 or more per day. But n
Electronics Forum | Wed Feb 26 10:54:18 EST 2014 | JB
Hello. Does anyone know how to add a different package to the Part Group on the Samsung CP45FV neo software? See picture. For example if we wanted a heading for Inductors, how do we add that? Thanks
Electronics Forum | Thu Apr 10 18:26:52 EDT 2014 | superlen
More questions about programming components. Is > there a comprehensive programming guide for these > machines? How does "image capture" & "Autoteach" > work? we have a few parts that we are struggling > with and they seem simple devices? Pics >
Electronics Forum | Fri Mar 08 04:03:34 EST 2019 | alexcouto
Hello guys, I am not very familiar with samsung cp 45 neo machines, however, I am trying to repair a head that from what I was told was always disabled. I activated head # 6 and there was no movement in the first phase, I thought it might be the fail
Electronics Forum | Mon Aug 30 17:21:46 EDT 2021 | jamesatqkits
So it was the drive, I was able to swap the conveyor drive for the mirror drive, these 2 drives are the same luckily. Just tapping lightly on the head would cause a 22 error to appear on the drive, at first I thought the motor must be bad. After talk
Electronics Forum | Tue Mar 07 17:31:25 EST 2017 | kahrpr
The mirror should stay open. go to sys setup go to head go t nozzle check settings. that is were the nozzle check is at
.gif)
winsouce.jpg)