Electronics Forum | Tue Oct 26 18:03:05 EDT 1999 | Dave F
Sai: I can't amswer your questions, but I can give you some leads to people that may be able to help you. Below is a list of companies that deal used equipment. Some refurbish equipment, others turn the equipment from seller to buyer. Good luck.
Electronics Forum | Thu Feb 10 16:19:57 EST 2005 | black5629
Anyone out there knows how to reset initialization failed error on a Photon Dynamics SV-2000 AOI machine. The manual said to cycle power on servo box, I can't seem to reset. Thanks
Electronics Forum | Thu Mar 21 05:39:08 EDT 2024 | acouto
Hello everyone, after several attempts it was necessary to change the servo box for a new one. It was fuji's solution.
Electronics Forum | Tue Oct 14 09:20:04 EDT 2014 | rgduval
Thanks, Deni, I discovered the servo control box, but, noticed that it was a sealed unit (and a third party unit, at that)! I wasn't sure if I should muck about with digging into it. But...now that you've identified the driver slots for me, we mig
Electronics Forum | Thu Oct 25 19:53:42 EDT 2012 | sonavc
Thank It worked without the user name and password.When I try to zero axis I have other error unable write to global memory 5008. My machine, when turn it on i don't see the power to the Digiplan 8 axis modular and no bright on 24VAC on at servo co
Electronics Forum | Fri Nov 18 02:42:46 EST 2005 | vinitverma
Greg, I recently faced this problem at a customer though the machine was Topaz X but the problem was same. So I suggest you first check if the GOOD LED is ON on the Servo card down in the MCX box. Also check the same GOOD LED on the System board in
Electronics Forum | Fri Jun 08 18:30:53 EDT 2007 | jmelson
I have the entire computer box assembly from a 1306/40 series machine. This was one of the first with the AC servo motors and digital drives. It was taken from a working CSM66 at the same time as I bought a CSM84. It was included to be used as spa
Electronics Forum | Tue Oct 16 18:07:53 EDT 2007 | jmelson
Oh, wait a minute. I have the complete control box from a CSM 66 III machine, Philips type 1306/40. That's the first one with the AC servo motors. The older ones had a stack of boards connected with masses of cables, the 1306/40 and later had a ba
Electronics Forum | Tue Apr 21 12:48:13 EDT 2009 | bk
ok you verified that the motor was bad. So now i would go back and verify that your voltages are still good on the back of the computer box and on the booster board. If they all check out fine. I would take the mot x board from your working machine a
Electronics Forum | Fri Jan 10 15:33:57 EST 2014 | hans88
Hello Rob, Thanks for your fast reply. I will check the parts you mentioned. You were right about the mot card we swaped it with a new one but that made no difference. Today we tried to find were the problem could be we: - removed the j1, j2 and
.gif)
winsouce.jpg)