Electronics Forum | Thu Apr 12 06:09:06 EDT 2007 | pavel_murtishev
Dear Samsung SM-321 users, Could you tell me what the pros and cons of Samsung SM-321 placement machine are? Any input is much appreciated. Thanks in advance. BR, Pavel
Electronics Forum | Thu Apr 05 13:01:08 EDT 2007 | mfoster
Hi, The Samsung SM321 XLB can handle 20" x 24"...
Electronics Forum | Fri Apr 05 02:05:33 EDT 2024 | ddfreeze
also swapped out DRAM sticks
Electronics Forum | Mon Apr 08 08:20:09 EDT 2024 | micropak
Can you try using a different set of DRAM sticks ?
Electronics Forum | Fri Apr 05 01:52:57 EDT 2024 | ddfreeze
Samsung SM321 machine fails to initialize when booting software. I have swapped PCI and communication boards, all resulting the same, I replaced the CMOS battery on communications board, tested the voltage on the backplane, and reloaded the software
Electronics Forum | Mon Apr 10 15:41:33 EDT 2017 | highmillr
when loading operator pressed "pallet out" button on the Samsung SM321 , she heard a crash and now the shuttle will not home. getting a "home search fault" popping up on the offline. I cant seem to find a manual here or online at all...
Electronics Forum | Wed Apr 10 21:47:55 EDT 2024 | ddfreeze
have swapped 2 different boards, can try switching the dram sticks, or ordering new ones. also the cmos battery on the motrola communications battery was dead, put a new one in, was wondering if there was a cmos reset/ jumper?
Electronics Forum | Fri May 29 06:07:47 EDT 2015 | buckcho
Hello, it is important to decide to work either with pcb or with opt files (we use only pcb), I dont recommend mixing them. When you open the pcb file, make changes, optimize it to opt file, then make save as.... and here is the trick I know - save t
Electronics Forum | Fri Mar 15 23:09:03 EDT 2024 | erikfriesen
You haven't said what kind of parts you are placing, what is the minimum size component? You might consider multiple machines in line rather than trying to fit this all in one machine, plus this has the advantage of upping throughput. You could get
Electronics Forum | Tue Dec 07 10:47:09 EST 2010 | walkbury
As a high mix, low volume CEM who deal with a lot of free-issued kits, we are heavily reliant on foil (tape cover) extenders. We don't usually bother with splicing as our machine feeders (Simenes Siplace and Samsung SM321) are designed in such a way
winsouce.jpg)