Electronics Forum | Fri Oct 15 15:03:32 EDT 2021 | kumarb
Hi. Personally do not have experience with this but we are reviewing the purchase of an X-ray system for our line. A tier 1 vendor we have worked with is Seamark that is a popular name in Asia. They offer some X-Ray equipment including a counter tha
Electronics Forum | Mon Oct 18 18:17:50 EDT 2021 | cyber_wolf
I brought all the major players machines in house and tried them. VisiConsult was the best hands down. Extremely simple GUI..no adjusting to get correct counts. The counting cloud feature is also a very slick tool. Support is 5 star.
Electronics Forum | Wed Oct 27 07:34:14 EDT 2021 | reinhardk
Hi, we have a DAGE Assure machine, and we are happy with the results it gives us. Even without proper teaching the results were good (for common part sizes). *With* proper teaching results are even better. Only in certain cases results are unusabl
Electronics Forum | Fri May 01 13:31:36 EDT 2020 | emeto
Omron were building some hybrid AIO/X-ray in one machine package
Electronics Forum | Fri Jun 14 00:47:17 EDT 2013 | mun4o
Thanks , Reese.Yes , I check the capacitors with C-meter.When measured with C-meter , all capacitors are OK - +/-10% of the value. I can not underst?nd "Note: This is not a summation). Y5V -- -20% of nominal value, -part tolerance, -machine toleranc
Electronics Forum | Thu Sep 10 17:28:28 EDT 1998 | Dave F
| I need packageinformation for smd comp. from as many suppliers as possible to program my pick and place machines | Thanks! | BGu. BGu: What's the deal??? Didn't your equipment supplier provide you with a component library? Dave F
Electronics Forum | Tue Jul 18 11:32:40 EDT 2006 | Joris Groot koerkamp
I am wondering what skills operators need to run an smd line itself. At our company they know how the pick&place machine works (refill/ changover), but if there is a problem with wrong placed components they don't known what to do. Our managmenttea
Electronics Forum | Tue Jul 18 15:47:07 EDT 2006 | Mark
IPC610 training to help verify issues that might arise. Also, the opeators need to know part numbers and descriptions because that should be common knowledge when running a SMT line. Plus, with your comment "At our company they know how the pick&plac
Electronics Forum | Thu Jun 13 08:32:24 EDT 2013 | rway
Have you verified the measurements on the bench with an LCR meter? Chances are you are experiencing aging with these ceramic caps. We have similar issues with X5R and X7R caps. You will see the effects of aging with returns from the field as well
Electronics Forum | Fri Mar 19 03:50:37 EDT 2010 | grahamcooper22
Some things you have to be sure of... Can you guarantee the LEDS are DRY when you receive them ? They may be packed in dry bags but when was this done and has the LED distributor had them open at his site ? Using vacuum sealed dry packs is a good way
winsouce.jpg)
