Electronics Forum | Mon Jun 20 09:12:55 EDT 2005 | davef
There's no easy answer. It depends on: * Thickness and size of the PCB in the array. * Means of separation. * Type of component. SMT components are more sensitive to the forces that need to be applied to separate the PCB. * Type SMT device. Ceram
Electronics Forum | Tue Jul 17 09:58:18 EDT 2007 | rgduval
I'd say it all depends on the CM, and how they cost out their production floor. I've seen everything from a flat cost per component placement (something like .05/machine placed smt part, .15/machine placed tht part, .25/hand placed tht part) to stra
Electronics Forum | Wed Jul 08 09:05:09 EDT 1998 | Jon Medernach
Going to SMT from THT you will find a tremendous difference in machine reliability. All the chip shooters are 99.9+%. Fuji has the largest market share in the US so you will hear alot about Fuji. In the Far East the Create chipshooter by Panasonic
Electronics Forum | Sun Aug 30 17:31:15 EDT 2020 | kylehunter
Hi all, (I posted on eevblog also, figured I'd try hear as well since this seems like a semi "niche" question) I need some advice on PCB cleaning. Up to this point, our assembly line has strictly run NC paste, with all SMT parts. We never washed an
Electronics Forum | Sun Apr 09 06:31:04 EDT 2023 | kumarb
I can speak from the Yamaha YV88X side (aka Emerald-X). We are an engineering company and recently started to use our SMT line. Absolutely love it and can run the machine with ease. Have assembled thousands of boards since COVID started. It is an old
Electronics Forum | Mon Feb 12 09:51:51 EST 2007 | rgduval
From what I see, you have a couple of options... 1. Hand solder the secondary side LED's. This is only a good option if you're going to be at low-ish volumes. Higher volumes tend to necessitate more automation to reduce production costs. However
Electronics Forum | Mon Jul 22 09:53:13 EDT 2019 | kylehunter
Hey all! As background, I recently purchased a full SMT line for my company. We have a DEK 265, an assembleon opal xii, and a Heller 1500. Currently our jobs are leaded, and the heller is working perfectly. An upcoming job that we are potentially g
Electronics Forum | Fri Jul 20 10:44:56 EDT 2007 | gmoritz
If you bought it from an equipment dealer ... OK, the dealer has come through and is (allegedly) sending a full compliment of documentation to arrive by Monday. > ... they need weekly maintenance ... > ... you WILL need parts for it. ... > Do you
Electronics Forum | Fri Jun 17 16:15:41 EDT 2011 | rway
One problem you may have with deeper scoring is not so much broads breaking apart unintentionally, but warping upstream while on the SMT line which can cause sagging. This may give you transport issues from one machine to another, and if you have an
Electronics Forum | Fri Apr 12 17:22:47 EDT 2002 | davef
First, splitting hairs on parlance. * Conformal Coating. A thin electrically nonconductive protective coating that conforms to the configuration of the covered assembly to provide environmental and mechanical protection. * Solder Mask. Coating mate
Main Products: 1. Original new and Original Used SMT/AI Spare Parts. 2. SMT Equipments And Related Machine( SMT Calibration, SMT Feeder Carts,Conveyer etc.) 3. Maintenace and Repair Service Pre-Sales Service Provide details ab
Manufacturer's Representative / Manufacturer / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
Building A, Jiepeng Square, Fuyong
Shenzhen, 30 China
Phone: 0755-33578694