Electronics Forum | Tue Jul 24 03:26:45 EDT 2001 | winnifred
Dr. Lee, For lead-free wave soldering, we are recommended to use SnCu0.7, why not 0.8 or more ?? Since SnCu0.7 has eutectic melting point at 227 deg C, does it mean with more Cu or less Cu, the melting point will be higher ?? Also, in lead solderin
Electronics Forum | Tue Jun 27 08:38:03 EDT 2006 | cuculi54986@yahoo.com
I tried some SN100C from AIM... On only one array. It flowed well on the chips but did not like the finish on the SOT23's on the board. I did not have enough arrays to mess around, so we switched it over to SAC305 and had no issues. I'm guessing w
Electronics Forum | Tue Apr 29 07:12:49 EDT 2003 | Glen barden
Sn/Cu/Ni is introducted to me in wavesoldering lead free process. Around in our industry, we have a plenty of info. about SAC but not on this alloy. The distributor showed me some information about this alloy including less dross, more shiny /smoot
Electronics Forum | Wed Jan 11 15:17:23 EST 2006 | pjc
I heard from Electrovert's engineers that the SnCu alloy has a really tight process window and is not very machine friendly. It is pretty much used exclusively by the consumer electronics folks. They�re always pinching pennies and are running, lets s
Electronics Forum | Tue Jan 10 14:44:42 EST 2006 | greg york
Not sure about Sn/Cu/Ni large market share here in Europe as we have a large part of the UK market with SACP0307 alloy 0.3%Ag introduced over Two years ago Also worked against Sn/Cu/Ni alloy with large TV Co and they went with 0.3%Ag due to reliabili
Electronics Forum | Wed Jan 11 10:49:35 EST 2006 | pete_d
Is anybody out there using Sn99.3Cu0.7 for wave soldering? How does it look. (Cost is about the same as eutectic 63/37).
Electronics Forum | Mon Dec 05 15:42:37 EST 2005 | les
Anyone with definitive reliability data on mixing thru hole lead free terminations (SAC and Sn/Cu) with Sn/Pb solder. Seems like a lot of conflicting information
Electronics Forum | Sun Sep 13 09:21:26 EDT 2009 | davef
You as, "What data is available showing the long term reliability of the intermetallics of the solder joints?" Alloy||Microstructure Sn-Pb||Lamella or globules Sn-Cu||Sn-matrix, Cu6Sn5 needles or globules Sn-Cu-Sb||Sn-matrix, cuboids of SbSn and Cu6
Electronics Forum | Tue Nov 26 15:16:30 EST 2002 | GSW
Hi, Anybody apart from the solder manufacturer themselves or their distributors who have used this alloy for lead free wave solder ?
Electronics Forum | Wed Jul 27 09:47:01 EDT 2005 | GCampbell
CEMCO Uk have done testing using SACX0307, SAC305 and Sn/Cu/Ni. The copper dissolution tests (report available) conducted at CEMCO showed that the lowest copper erosion rate was achieved by SACX0307. Regards Gerry
.gif)
.gif)
