Electronics Forum | Mon May 07 10:42:09 EDT 2012 | saju86ece
Hi, I need one clarification about solder paste printing height tolerance. How to define and fix the solder paste height tolerance after screen printing for inspection purpose. Currently we are using 5mils thickness of stencil, in that we are gave
Electronics Forum | Mon May 07 16:07:05 EDT 2012 | davef
Start with targets based on the stencil thickness (for height) and stencil thickness times the aperture size (for volume). * Set reasonable upper and lower control limits (+ 25% and –25 % of the targets, for example). * Next, check the printer set-u
Electronics Forum | Wed Jan 08 08:20:52 EST 2014 | emeto
To most of our boards I give 20-30% tolerance in both directions. From experience if you have big aperture on your stencil, the squeegee will scoop certain amount of paste from this aperture and you will see lower height. Depending on your board supp
Electronics Forum | Tue Jan 07 23:38:08 EST 2014 | m_imtiaz
want to know the tolerance the paste height in the solder paste printing. for example if stencil thickness is 7 mil, what will the acceptance level of paste height ( upper and lower) kindly share if any guidelines or formula for the same
Electronics Forum | Fri Apr 20 08:41:56 EDT 2001 | jimlew
For those of you out there, like myself who are still using 2-d to measure paste ht, I have 2 questions. 1. Typically, what tolerance are you applying to your ht? +- 1 mil, or what? 2. Are you using metal squeegees, and if so, have you found that squ
Electronics Forum | Fri Jun 01 14:50:29 EDT 2001 | Matt Gormont
I am looking for outline tolerances of a flip chip with a pitch of .25mm. Bumps are made of 63/37 solder. Key tolerances are bump height and positional tolerance of the bumps. Can anyone HELP?
Electronics Forum | Tue Feb 17 01:12:52 EST 1998 | J.H. Kim
In solder bumping in flipchip technology by splder printing, the precise control of solder volume and height is very difficult. Therefore I'd like to know the solution of this problem. Thanks
Electronics Forum | Tue Feb 17 01:15:26 EST 1998 | J.H Kim
| In solder bumping in flipchip technology by solder printing, | the precise control of solder volume and height is very difficult. | Therefore I'd like to know the solution of this problem. | Thanks
Electronics Forum | Tue Feb 24 01:19:01 EST 1998 | Jon Gruett
You are right !!! The exact volume of solder paste onto flip chips is extremely critical. Only one vendor that I know has taken that part of the process to the next level, whereby they can effectively deposit the right amount onto the flip chip exa
Electronics Forum | Tue Jul 02 02:50:55 EDT 2002 | ianchan
Hi mates, was going thru the IPC-A-610C Standards, and noted BGA voids stands somewhere between 10%-25% voids permissible in the solder "ball" bump, after reflow process. Was wondering, hypothetical case study, is there any specification for voids
winsouce.jpg)
