Electronics Forum | Mon May 07 10:42:09 EDT 2012 | saju86ece
Hi, I need one clarification about solder paste printing height tolerance. How to define and fix the solder paste height tolerance after screen printing for inspection purpose. Currently we are using 5mils thickness of stencil, in that we are gave
Electronics Forum | Mon May 07 16:07:05 EDT 2012 | davef
Start with targets based on the stencil thickness (for height) and stencil thickness times the aperture size (for volume). * Set reasonable upper and lower control limits (+ 25% and –25 % of the targets, for example). * Next, check the printer set-u
Electronics Forum | Wed Feb 20 02:12:44 EST 2019 | prasanth
what's the meaning of print pump head in solder paste printing
Electronics Forum | Thu Jan 27 01:21:48 EST 2011 | eliezerk
How can I print two various heights of solder paste on the same board , no space for graded stencil
Electronics Forum | Fri Jan 28 19:26:51 EST 2011 | jlawson
Milara has a combined Stencil printer + jet Printing ??? Print and then jet print areas not printed or top up prints.
Electronics Forum | Wed Feb 20 12:47:53 EST 2019 | ccouture
https://murraypercival.wordpress.com/2014/04/08/enclosed-pump-heads-for-stencil-printing/
Electronics Forum | Sat Mar 30 03:28:49 EDT 2019 | jacoblemaster
Thanks for the reply and this is the best one to get know about this print pump. Detailed and brief information.
Electronics Forum | Fri Jan 28 09:05:35 EST 2011 | ldavis
Use tape and reeled solder preforms and place them where ever you need more solder volume.
Electronics Forum | Fri Mar 29 10:11:02 EDT 2019 | cyber_wolf
“For a number of years now, work has been proceeding in order to bring perfection to the crudely conceived idea of a transmission that would not only supply inverse reactive current for use in unilateral phase detractors, but would also be capable of
