Electronics Forum | Thu Sep 03 09:00:52 EDT 1998 | James Horn
Can any one tell me if there is a large difference between green soldermask and blue soldermask, in reference to sending the board through the IR reflow oven. - two PCB's (smc parts) are manufactured, the first has green soldermask, the second blue s
Electronics Forum | Tue Jun 13 12:26:11 EDT 2000 | Todd Murphy
I am looking for opinions on soldermask between the lands of fine pitch components =
Electronics Forum | Thu Oct 02 11:04:48 EDT 2003 | russ
Out of curiousity, Isn't soldermask only used as a solder processing aid and to cover the copper? Russ
Electronics Forum | Thu Sep 03 10:04:14 EDT 1998 | Earl Moon
| Can any one tell me if there is a large difference between green soldermask and blue soldermask, in reference to sending the board through the IR reflow oven. | - two PCB's (smc parts) are manufactured, the first has green soldermask, the second bl
Electronics Forum | Sun Jul 26 07:52:35 EDT 2020 | sync40
Hello to everyone, Have you ever experienced soldermask bubbles inmediately after printed the soldermask itself? (for screen printing method of LPISM). I am not talking here about blistering or any outgassing defects after exposing to high temperatu
Electronics Forum | Thu Apr 22 18:07:38 EDT 1999 | Tom B.
| On various PCB's after building processes,such as reflow, flowsolder and wash. The soldermask on the PCB's have become discoloured, like a 'marble' effect all along the solder side of the board, it is lighter in contrast than normal, although when
Electronics Forum | Wed Oct 01 21:22:37 EDT 2003 | ramanandkini
We have a 1.6 mm thick automotive PCB board of size 35x70mm. One of our vendor has given us a batch with lesser soldermask thickness 5~8 microns. Will this affect the circuit board on a long term. What should be standard for the soldermask thickness?
Electronics Forum | Fri Jun 07 11:10:08 EDT 2019 | teejsd
We also have a Foresite C3 for spot testing for ionic contamination. I didn't use it at this spot, but used it some other spots around the PCB that showed this color change and with our C3 we were passing IPC standard for ionics. But I was wonderin
Electronics Forum | Thu Apr 22 10:57:20 EDT 1999 | Jack Coia
On various PCB's after building processes,such as reflow, flowsolder and wash. The soldermask on the PCB's have become discoloured, like a 'marble' effect all along the solder side of the board, it is lighter in contrast than normal, although when ot
Electronics Forum | Mon Feb 06 10:02:14 EST 2006 | Yash Sutariya
Sorry. I actually should clarify those slides. Black pad is not associated with tented vias. Also, you can tent vias with soldermask, but this requires the immersion gold process to be completed prior to soldermask. As such, all copper features (
