Electronics Forum | Wed Dec 13 12:08:57 EST 2000 | Stefan Witte
Apparently the adhesive tape peels off from the joint, which could have some reasons. 1. There should be an overlap of the cover tape, as Cal mentioned. The new cover tape laying over the old by approx. 2mm. I also peel the cover tape a bit off, whi
Electronics Forum | Wed Dec 13 03:40:13 EST 2000 | G. English
We have seen this problem, again using the methods recommended by Siemens. We tried different methods of splicing the tapes, but again the material was clogging in the feeders and especially in the cogs which grip and feed the tape. The only method
Electronics Forum | Wed Dec 03 11:48:54 EST 2008 | vleasher
Its mainly on the heavy hitters when the head is sitting over the feeder (Gold) and doing some multiple picks. Again this only seems to happen near the end of a reel. If we splice the reel is it picks perfectly directly after the splice.
Electronics Forum | Tue May 09 10:53:36 EDT 2006 | Tapesplice.com
Sierra Electronics can provide leader tape samples to any one that want to test. We can provide enough for testing at NO cost. We also have a Tape Splicer loan program that allows you to test ALL our Tape Splicing Products and lets you make the dec
Electronics Forum | Thu Jul 04 10:37:22 EDT 2019 | spoiltforchoice
Keep some empty tape and splice a long enough piece onto the foot of the tape to keep the strip and the reel connected.(Brass shim type splice being the most reliable) Or Print 3.5mm labels (Brother PTouch make one this size) and stick those onto y
Electronics Forum | Fri Jul 05 01:08:41 EDT 2019 | kasun_elk
It's difficult to allocate one operator to splice empty tape because we are always try to minimize # operators. Most of the time original reel are received to production and after completed assembling small strips are inside the feeder then there is
Electronics Forum | Wed Jul 09 10:45:11 EDT 2014 | cyber_wolf
Is there anyone actively splicing reels at the pick and place machines with success ? What type of splice tool are you using ? Any input regarding splicing appreciated. Regards, Sr.
Electronics Forum | Tue Jun 16 08:36:24 EDT 2009 | bocci572
We are looking into using a splicer for our SMT production area. I was wondering if anyone has any recomendations for a good splicer or splicing kit that can be used to splice our reels. I am looking for something that is easy to use and does not t
Electronics Forum | Thu Jan 11 18:29:01 EST 2001 | John Thorup
Hello Jeff If you're looking for splice tapes to join reels of taped components, or a full one to an empty end, you can get them from TopLine as #210002. wwwDummy.tv 714/898-3830 They list a web site demo for the splicing system www.tapesplicer.co
Electronics Forum | Tue Aug 17 22:59:25 EDT 1999 | KEVIN SIMPSON
| Anybody using trolleys with the pick-n-place machines and do you splice to the empty reels? Does it work ? | Hi Tim, We splice on certain brands of equipment up to 16mm wide reels.We have no problems with splicing,and the operators seem to handle
.gif)
.gif)
