Electronics Forum | Fri Oct 14 14:09:19 EDT 2005 | bschreiber
Your problem is not the 0.4 pitch. Your problem is the manual cleaning. Manual cleaning will only remove the solder paste from the surface of the stencil. What's more, manual cleaning will force additional contamination into the 0.4 pitch apertures
Electronics Forum | Sun Mar 10 05:28:03 EDT 2024 | dimamalin
Hello friends, over three thousand specialists have seen my post, but only three have reacted, and I'm very grateful to them. Even the simplest remark would satisfy me, like "we have such-and-such stencil washing machine, we've been using it
Electronics Forum | Mon Jul 18 09:43:31 EDT 2005 | norrin_radd
Aside from a visual first article to IPC 610, what inspection criteria do people put in place post wave solder (pre clean)? Thank you
Electronics Forum | Thu Aug 04 16:34:03 EDT 2005 | bhu
You haven't mentioned whether you are producting only through hole product or if it is mixed technology. What kind of flux (no clean, H2O clean) you are using and whether you performed a first article at part stuffing prior to wave. Generally, you
Electronics Forum | Wed Aug 16 12:49:30 EDT 2000 | Bill Schreiber
Phil, I know it must be frustrating to try and weed through all of the hype that is put out by various stencil cleaner manufacturers. However, there is some impartial published data available. An article by Richard Clouthier (now with Photo Stenc
Electronics Forum | Sun Nov 08 10:22:52 EST 2009 | doremi
Hi everybody, First of all, to have process under 100% control you should have AOI after every active process in the pcb assembly line : - Post printing (2D or 3D Solder paste inspection machine); - Post reflow; - Post selective(wave solder). It i
Electronics Forum | Thu Jun 20 15:05:41 EDT 2002 | carln
I saw this system at one of the last APEX Shows. I was not impressed because of the many downsides and potential hazards. Strapping an electrical device on your hand and placing the device into a liquid is kind of like blow-drying your hair in a ba
Electronics Forum | Thu Jun 07 15:37:32 EDT 2001 | Claude_Couture
Kerryn, It's the first time I hear someone who needs an automated inspection machine to check the cleanliness of stencils. Why not improve on the cleaning method itself. I use ultrasonic batch cleaner. It takes 3 minutes to clean a stencil, 2 minutes
Electronics Forum | Tue Jun 05 13:23:27 EDT 2001 | kerryn
We are a high-mix/low-volume operation and end up cleaning 40 - 50 stencils per day. Does anybody know of an automated inspection system or "scanner" that can check a stencil for cleanliness?
Electronics Forum | Thu Jun 07 13:40:12 EDT 2001 | kerryn
Dave, We have very short runs (less than one hour). We have stencils all over the place waiting to be cleaned. It is too time consuming to scope each stencil to inspect for cleanliness. Do you know of any automated or scanning devices that can ra
Our Company handle AOI (Auto Optical Inspection) and SPI (Solder Paste Inspection) Machines.
Equipment Dealer / Broker / Auctions
Hwaseong-si, Gyeonggi-do, Korea
Hwaseong-si, South Korea
Phone: +82-1029254936
