Electronics Forum | Mon Jul 30 21:12:10 EDT 2012 | davef
We're seen components sticking to adhesive that was slobbered on the inside of cover tape.
Electronics Forum | Thu Jul 19 18:15:15 EDT 2012 | jil2000
We have a material that is been stick at cover tape, only 1 supplier is failing and only embossed tape packing is failing. A dark spots between tape and component are observed, we already bake material to se if is humidity, is not. We already apply
Electronics Forum | Sat Aug 18 23:03:07 EDT 2012 | eadthem
We have had this problem in the past, On paper tape resistors(old stock from before i took over and forced rotation on everything) and on embossed (national semi parts, strings of glue pulled back like seat belts across the pocket.) For the national
Electronics Forum | Fri May 20 09:50:10 EDT 2011 | blnorman
Have you checked for ESD?
Electronics Forum | Fri May 20 09:13:58 EDT 2011 | ck_the_flip
We have issues with the Philipps Luxeon Rebel LED where the part sticks to the cover tape during advancement. This causes the part to get flopped around in the pocket or the component gets dropped and damaged when the feeder advances. Has anyone ex
Electronics Forum | Fri May 20 11:14:08 EDT 2011 | davef
While you're waiting for others to reply, search the fine SMTnet Archives. For instance, look here: http://www.smtnet.com/Forums/Index.cfm?CFApp=1&Message_ID=61842
Electronics Forum | Tue Jul 13 05:21:04 EDT 2010 | bubbobbed
Guys, I've received complaints from customer that the chip is sticking on the cover tape or carrier tape when detape. Is there any possible that i can solve the problem by changing the cover tape or carrier tape?? some say the root cause of this issu
Electronics Forum | Tue Jul 13 14:25:09 EDT 2010 | davef
While you're waiting for others to reply, here's link to a recent thread that seems similar to yours: http://www.smtnet.com/Forums/index.cfm?fuseaction=view_thread&CFApp=1&Thread_ID=14787&mc=13
Electronics Forum | Thu Sep 30 07:34:27 EDT 2010 | sibbe
Hi, We are having some serious issues with placing the Luxeon Rebels. The problem is caused by the components sticking to the tape. We don’t know what causes it, but I remember to have read something about components sticking to the tape on this For
Electronics Forum | Mon Oct 04 09:27:43 EDT 2010 | floydf
We have found that the lenses on the Rebels have are gooey and sticky. We put a little bit of WD40 on the shutter part that contacts the lens. Just a little bit. Basicly, put a drop on and try to wipe it all off with a paper towel is enough.
winsouce.jpg)