Electronics Forum | Thu Nov 17 15:57:41 EST 2011 | olddog
Hi Bobpan, Regarding "second", the results of the test are no difference - still rejects the part. I tried 2 mils, 3 mils, 5 mils, 7 & 9. I changed the tolerances fron about 15% to 20%+. By the way, I did put on the new nozzle and it is still the sa
Electronics Forum | Thu May 28 12:31:46 EDT 2009 | wrongway
We have universal advantis which us there leser machine I could'nt be happier with it we used to have Amistar machines for ten years it worked ok. but the universal lighting head works great we have had our machines for about 2 years now with very li
Electronics Forum | Wed Aug 03 13:04:04 EDT 2022 | proceng1
My initial thought is that the part is slightly delayed in releasing. When you are running one head, it doesn't matter. But when running multiple heads, the machine starts to move to the next placement before the part has fully released from the noz
Electronics Forum | Sat Apr 01 16:41:01 EDT 2023 | dilogic
Today I stumbled upon very odd issue - we have one GSM2 with FlehJet heads on both axes. New program was created and it stops on the first task for Head2 throwing out a message like this: "Component 0u1/0805 (reference id C4) can't be found wit
Electronics Forum | Wed Mar 31 06:08:45 EDT 2010 | miroyu
Hi everyone ! I started to program quad 4C for the first time and have some problems. First, board detection LED and proximity Led (on the front panel) are not lightning whatever I do! Second problem is I teach machine board size, nozzle locations
Electronics Forum | Wed Sep 24 08:34:57 EDT 2003 | stefwitt
Even when you run a board several times, the machine may not make the same travel path every time. This in itself does not create a problem, but the vacuum on the nozzles could be different, dependent on the configuration of components on the heads.
Electronics Forum | Fri Sep 22 15:35:14 EDT 2006 | lheiss
Hello all, Finally ready to run my first 14 up array and the machine picks up the part moves to the placement location, them moves to home and drops the part. The Z axis never moves. I do get a "run error 1" at about the 4th placement (if it was a
Electronics Forum | Mon Jan 29 10:50:35 EST 2007 | mika
What about the component placement with Head #2? Head # 1 is ok? Is it only the pickup that is the problem and if so, from all feeder banks (front & Rear)? Concider Z-axis height adjustment, procedure is in the manual. You normally don't need to re-
Electronics Forum | Thu Aug 30 14:14:27 EDT 2001 | dougt
James Take a board with double sided tape and run it with all the other parts "shorted". Make sure that the part is being placed by the head/spindle that will be used during a full run. Inspect the part after it is placed and carefully remove it a
Electronics Forum | Tue Oct 26 00:03:09 EDT 2010 | jmelson
Hmm, that's a fairly old machine, even older than mine! (I have a CSM84 PA130640). Anyway, it is best to program the machine from CAD system data, I wrote a little program in C to read in the component type and XYR position, and produce the file in
