Electronics Forum | Wed Feb 09 08:54:42 EST 2000 | pascal MATHIEU
Hello friends , in order to try to reduce our labour cost , we are thinking to replace manual placementof PTH COMPONENTS by automatic unit which 'll be able to place relays ,and connectors . is there anybody on this forum to advise us on this topi
Electronics Forum | Tue Oct 01 12:23:26 EDT 2002 | barryg
We are looking at possible doing a few through hole components on the smt line. Is this feasable? What types of components are diffucult to do this way? What stencil considerations are there? Anyone have any info on this subject?
Electronics Forum | Thu Sep 12 12:45:56 EDT 2013 | deanm
> manual insert any remaining odd form components >> selective solder or hand solder if needed.
Electronics Forum | Thu Jul 23 18:58:20 EDT 2020 | stephendo
Insertion isn't enough. You also need cut and clinch for axial, radial, and dip components.
Electronics Forum | Thu Sep 12 11:22:58 EDT 2013 | gregp
Wow, great information! I have a feeling you are talking about some predominantly through hole assemblies with mostly common components. In this case fully automated solutions make sense if the volume is there. But these machines cannot do everyth
Electronics Forum | Tue Oct 01 16:18:16 EDT 2002 | davef
Q1: Is this [paste in hole] feasible? A1: Yes, many people lower their operating cost by reflowing through hole components. Q2: What types of components are difficult to do this way [paste in hole]? A2: Types of through hole components that are d
Electronics Forum | Wed Nov 19 21:39:18 EST 2014 | gregp
Hi Spoilt...thanks for your reply. The latter part of your reply is a bit perplexing though. The CS-400E is easy to set up. There are two lights spots that indicate the insertion location. The component does not need to be prepped other than bent
Electronics Forum | Sun Mar 15 14:10:26 EST 1998 | baruch schiffmann
we are looking for paste printing specs.& stencils holes shapes to perform soldering reliability d.o.e. of the a.m. subject. looking forward to your info. tech. dept. /telrad prod.
Electronics Forum | Wed Nov 19 15:48:48 EST 2014 | gregp
Thank You Adam...this is the type of input I am looking for. To summarize, you are an OEM that has gone through the process to remove most through hole parts from your assemblies. Those that remain are primarily connectors which may not require lea
Electronics Forum | Tue Oct 01 16:22:46 EDT 2002 | stepheno
You have to be sure the TH parts can take the reflow temps. A lot of time you willl have to get special components. We do some BNC's this way, but they had to be special order BNC's. There is more info in the fine SMTnet archives.
