Electronics Forum | Tue Dec 16 19:45:47 EST 2003 | Hiram
Hi, I am looking for the IPC criteria hole-to-lead ratio. Does anybody know a practical way to determine if some holes in my pcb's do not get enough solder in the wave solder machine because an inapropiate hole-to-lead ratio? Thanks in advance! Hi
Electronics Forum | Thu Dec 09 18:21:20 EST 1999 | Boca
Mike, Russ is right, no 'normal' wave machine will solder PCB's with 1" long lead length. I have seen waves modified to clear up to 5/8" leads, but the deeper the wave the uglier things get. They get uglier in that a lot more dross is produced, con
Electronics Forum | Fri Dec 10 12:40:44 EST 1999 | Brian W.
It sounds like the process is very labor intensive, and all the verification is done after the parts are soldered. Assuming you are hand placing the components: 1 - Contact Systems semi-automatic placement machine. It show polarity when placing, so
Electronics Forum | Wed May 27 10:19:43 EDT 1998 | Jerry
We have no problems but orientation does matter. Orient with longest side of component body perpendicuar to wave. In other words the same preference as with through hole DIPS. Idea is the same as for through hole, that the surface tension will ten
Electronics Forum | Wed May 27 14:35:52 EDT 1998 | Justin Medernach
| | R&D is currently designing a board with smt components on both sides of the board. They are adding a 16 pin IC Gull wing. on the bottom side of the board. I have asked for only caps and resistors to be placed on the bottom side. Is there a recomm
Electronics Forum | Tue Jan 18 12:36:11 EST 2000 | Dave F
Dave: I haven't located something to support your contention, yet, and I'm not going to comment on the factors that drive reliability beyond component selection, because I know that you've got some sweaty-palmed sales type wringing his hands waiting
Electronics Forum | Wed May 27 13:42:08 EDT 1998 | Chrys
| R&D is currently designing a board with smt components on both sides of the board. They are adding a 16 pin IC Gull wing. on the bottom side of the board. I have asked for only caps and resistors to be placed on the bottom side. Is there a recommen
Electronics Forum | Wed Feb 27 17:12:30 EST 2002 | sueph
I am interested in the book "Soldering in Electronics Assembly" by Keith Brindley and Mike Judd. Has anyone read it or can anyone recommend itor one that is good. thanks
Electronics Forum | Wed Feb 27 17:25:39 EST 2002 | JoAnn
This book, as well as many others on soldering, is available from the SMTA. It can be purchased on-line at http://www.smta.org. Click on Bookstore. Jesse in our office (952-920-7682) can also answer specific questions you may have.
Electronics Forum | Wed Feb 27 22:24:28 EST 2002 | davef
I own and have read this book. While it is better than the average soldering book, it is not the first book that I reach for in trying to sort through a problem. It introduces a broad range of soldering methods with a reasonable amount of detail, b
.gif)
.jpg)
