Electronics Forum | Sat Mar 31 16:59:30 EDT 2018 | menvox
I'm trying to give a second life to a MPM ULTRAPRINT / SPEEDPRINT 200, I'm searcing for a MINJO gear reductor with a ratio 21:1. If you have parts for this printer , or some user/ service files, please let me know.
Electronics Forum | Tue Aug 04 13:44:05 EDT 2009 | swag
Check your DIP switch settings on new driver. Not sure about calibration. Try QMPM for password.
Electronics Forum | Tue Aug 04 14:43:12 EDT 2009 | kpm135
Thank you very much SWAG that password did the trick. Got us into the calibration menu and we were able to calibrate the z-axis and snugger height and got it to work. Thanks again
Electronics Forum | Tue Aug 04 10:43:48 EDT 2009 | kpm135
Thanks for the suggestions! It ended up being that a wire on the amplifier card in the lower drawer came loose and was making intermittent contact. Tightened all the wires down and the problem has gone away. Now we have a new problem. We had to repla
Electronics Forum | Tue May 25 18:49:30 EDT 2021 | bukas
you need constant 4-6 bar pressure and 200 N liters of air if I remember correctly. dont forget to run calibrations. default system password is 1 after each head calibration you need to update machine in calibration menu and menu before that or it
Electronics Forum | Tue Nov 01 18:41:10 EDT 2022 | griinder
misc. Info), and the profile in component editor under the other tab. Default is 20. There is a way to change numerous values at once, but it takes a hidden click and password to do. First verify both places for a part are set to 20. Is it possible
Electronics Forum | Tue Jan 17 10:29:10 EST 2006 | Mike Konrad
Armakleen is compatible with CPVC as are most aqueous-based chemistries. Armakleen, in its day was a superior chemistry. It was the first of the aqueous blends to offer bright solder joints (earlier saponifiers commonly dulled solder joints). Arma
| 1 |
