Electronics Forum | Sun Oct 27 21:47:25 EST 2002 | raton
Electric drivers are harder to adjust wich keeps production people from messing with 'em. Electrics are resistant to other variables such as air preassure, quality, other air supply users on the same line and so on. I prefered to use all electric e
Electronics Forum | Fri Oct 18 21:42:04 EDT 2002 | caldon
We did weekly and monthly. Final assembly (Heavy use) recieved weekly. Field service area, sub assembly, low volume, ..... we went monthly. I wrote the ISO specs to read "Calbration of screw drivers to be monitored and logged"( this Simplified of
Electronics Forum | Tue Feb 27 10:34:37 EST 2024 | clpassoni
Servo motor. Maybe it's a weak encoder? This can happen? Is there any adjustment that can be made?
Electronics Forum | Wed May 19 20:45:34 EDT 2021 | compit
The black pad (washer) should be complete with the valve. I have replaced the floppy drives a long time ago :). Software - do you have the optimization of the program in the machine !!! The only thing I use additionally is "PCB Synergy" to import f
Electronics Forum | Tue Dec 22 13:56:20 EST 1998 | Michael Allen
Yes, you can adjust the board clamp speed by adjusting the flow control valve on both air cylinders (front and rear). You may also want to adjust the software delay for the conveyor so that it starts after the board is completely lowered. | Once
Electronics Forum | Fri Sep 03 08:25:30 EDT 2010 | remullis
I removed the muffler yesterday and still had the latch releasing issue, the latch was tight, however the table had some play in it. I adjusted the play out of the table, setup table zero and it fixed the problem. Same symptom as if the latch were lo
Electronics Forum | Thu Aug 23 13:00:29 EDT 2012 | leemeyer
That would be an air flow control valve used to adjust the speed of the squeegee. You can get them from Festo or I am sure that McMaster Carr carries them.
Electronics Forum | Thu Dec 19 07:58:40 EST 2019 | apierce
Is anyone out there having issues with the new improved pumps requiring weekly disassembly? Our nitrogen ppm is at 6 pressure is 85 to 95 psi. We replaced and adjusted the nitrogen supply valves. Thanks
Electronics Forum | Tue Oct 31 19:37:34 EDT 2023 | ttheis
That is true; it is not a fast process but it is selective and uses minimal material. Also true that the application consistency has to be checked and sometimes minor adjustments made at the beginning of a run. We have a program that checks for a con
Electronics Forum | Wed Oct 19 13:07:04 EDT 2016 | cyber_wolf
Are there indentations in the paste ? If there is, you have a couple things to look at off the top of my head:1) make sure your spool valves are shutting completely off. 2) make sure there is nothing sticky on your nozzles.3) Adjust the blow off/ "ki
.gif)
