Electronics Forum | Tue Oct 27 18:07:39 EDT 2009 | burb1999
Have 8" metal exhaust going out the oven to the roof and no filter or flow meter. Have used a filter and flow meter before, anyone have any info on this or where to purchase the needed items? Thanx, Todd
Electronics Forum | Tue Oct 27 22:48:48 EDT 2009 | fulldrawmike
Have 8" metal exhaust going out the oven to the > roof and no filter or flow meter. Have used a > filter and flow meter before, anyone have any > info on this or where to purchase the needed > items? > > Thanx, Todd McMaster Carr has just abo
Electronics Forum | Mon May 24 15:50:11 EDT 2004 | Rob
hi all What do you think about soldering pb-free in reflow oven (air) lenght 1,7m (5 zones top,bottom) with max zone temp. 300C? Do you think that this process will be stable? Our max PCb dimension 260x260 mm. When i compare different oven producer t
Electronics Forum | Mon May 24 16:45:44 EDT 2004 | Bob
BTU as well as most oven manufactuers have great products. If they fit what your looking for and can give you good support(preferably local) then you should not really see any quality problems with their products. With the oven max temperature of 300
Electronics Forum | Fri Apr 16 14:01:48 EDT 2010 | richardli
It could be the flux condensed in the oven. We plan to clean the vent and filter next week. Then we see if help. I just want to see if anybody has same problem in experience. Soldermask supplier told us the same white soldermask always change to a l
Electronics Forum | Thu Jan 08 11:06:40 EST 2004 | russ
If I read this correctly you have two identical ovens that were setup the same ie zone temps, fan speeds etc... when you ran the same board through each of them one showed a lower board temp. Is this correct? Is the temp of the board 7 deg. lower t
Electronics Forum | Tue Feb 22 17:45:45 EST 2005 | Austinj
Heller 1500 Convection Reflow Ovens are a five zone upper/lower reflow oven. Petlock currently has two listed with specs and pictures. Here's a link for more info. NOTE: I do not work or have any affiliation with PETLOCK http://www.petlock.com/used
Electronics Forum | Fri Jan 19 07:26:45 EST 2007 | Richard-magictek Tech
kindly send me your reflow profile ---and also the PCB lay out i shall able to determine your process flow on speed....and glue application i can be reach at this email- rdm@magictek.com.cn my web site is ;www.magictek.com.tw we are furance maker w
Electronics Forum | Mon Apr 15 06:30:23 EDT 2019 | spoiltforchoice
Its not the max temperature that is the issue, its how much energy the oven is capable of transferring to the PCB inside the 4-6 minute window of a typical profile. In a conveyor oven this is achieved by having zones of different temperatures, but th
Electronics Forum | Mon May 13 03:01:23 EDT 2019 | peterchan
Hello, sir. We are a SMT equipment manufacturer from China. We have a hot-press soldering machine that can change your current situation of manual soldering on PCB board. In addition, we have a better reflow oven, the upper and lower two cold tempe
Products, services, training & consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep, Distributor & Service Provider for Seamark/Zhuomao and Shuttle Star BGA Rework Stations.
Training Provider / Manufacturer's Representative / Equipment Dealer / Broker / Auctions / Consultant / Service Provider
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830
