Electronics Forum | Fri Jan 05 18:04:35 EST 2024 | madisreivik
My old machine still has tricks to annoy me 1CA0C004 vision error. Trying to place large part, about 30x30 (gsm micromodule). Very simple part, square. But machine is dropping that part and gives vision error "nozzle bent". Part rotation is 90 deg
Electronics Forum | Mon May 03 08:42:12 EDT 2010 | dekhead
The $20K number thrown out there by the OEM would lead me to believe there is something else going on and/or it's the black camera vision... green/silver they usually use the $10K. DEKHEAD
Electronics Forum | Mon Sep 19 11:29:33 EDT 2011 | padawanlinuxero
Hello guys ! I have a problem with a DEK 265 GSX, sometimes after download the vision or during, I get this error message: Vision hardware error Controlled lighting not responding FATAL ERROR - REINITIALISE MACHINE Now for a few weeks it gave me
Electronics Forum | Thu Apr 11 11:32:16 EDT 2013 | markhoch
It might help to investigate the error code provided for the rejected parts. It could help point your troubleshooting methods in the right direction. (Example, if it's failing for vision errors, you may need to make adjustments to your vision file di
Electronics Forum | Fri Nov 17 09:29:27 EST 2000 | CAL
Some more information is needed. Is there a machine error indicating a mispick? Or a vision error Component missing? I am not as familiar with UIC machines as I am with Siemens but here is my $.02 anyway. Try shimming the feeder under the pick up pos
Electronics Forum | Wed Jan 10 21:03:02 EST 2024 | madisreivik
Vision error found: YOU MUST CHANGE LAMPS SOMETIMES ! Also, the camera front-glass (with the cutout) must be correctly positioned :) Still looking the Q error on left head. Probably mechanical problem...
Electronics Forum | Wed May 05 04:25:42 EDT 2010 | vms
We sale the cognex cards for 3500.00 all of the time, think we need to raise our prices. Right bruce? Harry
Electronics Forum | Fri Dec 10 02:49:06 EST 2010 | bagindia
we are facing vision error problem after running the machine for half an hour.Cause is x-axis motor % is changing & also motion is little harder compared with Y-axis
Electronics Forum | Fri Aug 26 05:18:05 EDT 2016 | ariss_t
Hi, anybody facing the vision 'off' error when using MPM Momentum ?? i change the purple vision cable but still facing the same issue.. the image go black when camera moving for searching fiducial.. any ideas ??
Electronics Forum | Thu Nov 21 11:51:28 EST 2013 | dekhead
Best guess, not knowing specifics of error, would be a vision system error... connection issue wrt camera. Does system respond properly (prompts to raise / lower head) upon reboot? Specific error information would help in troubleshooting. DEKHEAD
Industrial Sensor Vision International specializes in advanced camera technology of high resolution fast speed cameras for automation, AOI, 2-D/3-D, SPI inspection and wafer inspection.
3 Morse Road 2A
Oxford, CT USA
Phone: +1 203 592 8723
.gif)
winsouce.jpg)