Electronics Forum | Wed Oct 19 22:48:18 EDT 2016 | thaneshsivanadian
Hi All, Currently im seeing a cold solder/ poor wetting underneath the BGA Ball as i shown in the attachment. From the attachment you also can see one ball with poor wetting and another ball with a good wetting. When i checked with my re-flow profil
Electronics Forum | Tue Aug 11 14:09:30 EDT 1998 | Bucky Allen
Looking for Suppliers of surface mount wetting balance equipment.
Electronics Forum | Tue Mar 10 22:27:14 EST 1998 | DWR
What does the term "poor wetting" mean as a defect code ?
Electronics Forum | Wed Mar 11 10:58:58 EST 1998 | Earl Moon
| | What does the term "poor wetting" mean as a defect code ? "Poor" should mean unacceptable when surface (component or PCB solder termination areas) wetting does not provide acceptable solder joints. Unacceptable wetting of PCB solder termination
Electronics Forum | Wed Jan 04 16:21:14 EST 2006 | jrlouden
What is the preferred method of under stencil wiping? (Wet or Dry wipe)
Electronics Forum | Thu Sep 07 08:44:17 EDT 2006 | vicknesh28
Did check the coplanarity of the failed lead and found it to be as good as the wetting leads.
Electronics Forum | Mon Jul 28 05:35:17 EDT 2008 | surendra268
What could be the main reasons for De-wetting in reflow process. Can anybody answer
Electronics Forum | Thu Oct 28 09:25:35 EDT 1999 | Dave F
Chris: Typical non-wetting causes are: * Poorly controlled soldering process * Incorrect material * Surface contamination * Insufficient preheat * Misapplied solder mask * Shadowing Without intending to insult you, all of the causes of non-w
Electronics Forum | Mon Apr 26 17:12:14 EDT 2004 | babe
Take a solder iron with some wire solder and attempt to tin the leads of the component. Look under magnifier or microscope. Did they wet? If not try fluxing them with liquid flux and then soldering again. Did they wet? If they did not then you may wa
Electronics Forum | Thu Jan 25 12:18:40 EST 2007 | wagoner
There are several smd components in our factory that don't reliably wet to solder during reflow. Paste and placement are good, but the component won't wet reliably. All of the other components on the boards solder fine, but one of these components
winsouce.jpg)