Electronics Forum | Wed Jan 04 16:21:14 EST 2006 | jrlouden
What is the preferred method of under stencil wiping? (Wet or Dry wipe)
Electronics Forum | Thu Mar 01 10:46:11 EST 2001 | davef
Various lint free stencil wipe suppliers take various approaches to stencil cleaning. For instance ... Techspray Directions: Start with a dry TechClean Wipe (2358, 2361, or 2362) to remove excess solder pastes. Follow this with the 1608 Pre-Saturat
Electronics Forum | Wed Jan 04 16:43:36 EST 2006 | jdengler
Wet wipe could allow solvent through the apps and into the paste. For this reason I never never never use wet wipe.
Electronics Forum | Thu Apr 28 09:19:21 EDT 2016 | vchauhan
Would you use dry wipe or wet wipe procedure for your Stencil Printing process? Whichever you use would you please let me know the benefits of it? Thank you in advance.
Electronics Forum | Thu May 04 11:39:10 EDT 2023 | dontfeedphils
We typically wipe the boards with a lint free wipe soaked in the same under stencil cleaning solution we use in our printer, then run it through our spray-in-air stencil wash.
Electronics Forum | Wed Mar 24 17:22:54 EST 2004 | pdeuel
Where is the fibres comeing from. Most of the time fibre is comeing from the stencle wiping process. If useing paper or cloth fibres will shear off in appature of stencle. If this is the case and you are useing an automated printer with a quality wip
Electronics Forum | Thu Jun 15 06:58:54 EDT 2017 | cyber_wolf
Hmmm.... When I clean my stencils after I run a job, it is to clean the paste off the stencil so it doesn't dry out in the apertures and on the stencil surface while it is being stored. Wiping the stencils during production is to clear the paste of
Electronics Forum | Sun Feb 15 17:32:08 EST 2004 | brian bennett
i have always found any of the alcohol based solvents good.here in the uk we use the alpha make.with screen auto wipes i found the set up to be most important.i.e how many pcb's printed before wiping.i found running pcbs with bga and .50 pitch compo
Electronics Forum | Wed Mar 31 16:40:51 EDT 2010 | waveroom
I would not call them rags but would call them lint free wipes. They are 100% cotton twill wipes. That means they won't leave a residue even when wiping thruhole components, you would think they would tear but they don't. Most high quality jeans are
Electronics Forum | Wed Nov 02 01:53:41 EST 2005 | pavel_murtishev
Hello, Thank you for answer. We are using second hand machine. What do you mean saying that �stencil is not height on all 4 corners�? Does it have some inclination between corners? I mean that three corners of stencil are matching with PCB fine and
.gif)
.gif)
