Electronics Forum | Mon Nov 12 15:28:28 EST 2012 | rway
YesTech recommends to calibrate every 6 months. So yes, annually at the least.
Electronics Forum | Fri Apr 28 21:47:41 EDT 2023 | dwl
It's been a long time, but if I remember correctly, the BX has higher resolution cameras. The software is the same so the learning curve will be minimal, but due to the higher res cameras, you won't be able to move programs from the B3 to the BX. If
Electronics Forum | Thu Nov 08 12:10:53 EST 2012 | cdeguchi
Hello, We have 2 AOI Automatated Inspection Systems, Model YTV-BV, as we are going through auditing and the Auditor requests that we need to have documentation to indicate whether the units are required to calibrate annually or not. Please kindly r
Electronics Forum | Tue Apr 25 20:39:36 EDT 2023 | ttheis
We have a Yestech B3 AOI and it has been working pretty well for years but its flaky some times when the programs get larger/complex. We are considering a newer machine but we're small and need to buy used. We're looking at a BX model. Does anyone ha
Electronics Forum | Thu Aug 02 10:48:29 EDT 2018 | dleeper
I'm going off fuzzy memories for a YTV-2000 but its probably not too different for the 1000... The motor drivers need to be configured for the specific axis they are driving. This should have been done by Yestech before they shipped them to you. If
Electronics Forum | Fri Nov 16 12:12:46 EST 2012 | yestechservice
This documentation can be downlaoded from our FTP site. Please contact us at 1.760.918.8471 or via email at service@nordsonyestech.com and the first person availble should be able to help you.
Electronics Forum | Thu Aug 02 15:06:03 EDT 2018 | jeffallen662
They where bought directly from YesTech and were guaranteed to be programmed from YesTech.
Electronics Forum | Thu Aug 02 14:10:55 EDT 2018 | jdengler
Could they be on the wrong axis from what they are configured for (X and Y swapped)? Jerry
Electronics Forum | Thu Aug 02 09:14:17 EDT 2018 | jeffallen662
Hey I'm having some issues with a YesTech YTV-1000 AOI machine. The machine isn't recognizing the X and the Y stepper motors. As far as we can tell nothing mechanical is wrong with the AOI. They are new motors and were suppose to have been programmed
Electronics Forum | Sat Apr 29 02:14:24 EDT 2023 | ttheis
Yeah we had an issue with the b3 dongle which we were fortunately able to fix by replacing the usb connector on the dongle. The price they quoted for the dongle was absurd. Thanks for the info. The software on the b3 is really flaky and it crashes a