| https://www.eptac.com/ask/what-is-the-correct-way-to-fill-solder-cups/
. They will tin the wire, set the wire in, press the iron on the wire/solder cup and add solder. I’m not too familiar with soldering cups, but I am thinking that this will cause solder to wick up into the jacket
| https://www.eptac.com/faqs/ask-helena-leo/ask/what-is-the-correct-way-to-fill-solder-cups
. They will tin the wire, set the wire in, press the iron on the wire/solder cup and add solder. I’m not too familiar with soldering cups, but I am thinking that this will cause solder to wick up into the jacket
| https://www.eptac.com/5-common-solder-mistakes-and-how-to-resolve-them/
. This issue can be resolved by removing the excess solder between the joints with a hot iron tip or solder wick. To prevent this error going forward, only use enough solder to create an acceptable joint, as the excess alloy can lead to bridging and other deficiencies
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/RSS_footprint-for-solderable-jumper_topic2089.xml
. Place a solder wick on the solder and apply the iron and the solder wick sucks up the solder and with a wire mesh touchup it should be clean to go
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/footprint-for-solderable-jumper_topic2089.html
. Place a solder wick on the solder and apply the iron and the solder wick sucks up the solder and with a wire mesh touchup it should be clean to go
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/footprint-for-solderable-jumper_topic2089_post10081.html
. Place a solder wick on the solder and apply the iron and the solder wick sucks up the solder and with a wire mesh touchup it should be clean to go
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/footprint-for-solderable-jumper_topic2089.html
. Place a solder wick on the solder and apply the iron and the solder wick sucks up the solder and with a wire mesh touchup it should be clean to go
PCB Libraries, Inc. | https://www.pcblibraries.com/Forum/topic2089&OB=DESC.html
. Place a solder wick on the solder and apply the iron and the solder wick sucks up the solder and with a wire mesh touchup it should be clean to go
PCB Libraries, Inc. | https://www.pcblibraries.com/forum/topic2089&OB=ASC.html
. I'm sure solder wick and flux could clean them out, but I really want something easy to work with. Have you personally soldered and desoldered all of these
| https://pcbasupplies.com/anti-static-1/
printed circuit boards, computers, cell phones, or other electronics Easily removes solder from components or pads on a circuit board Concentrated fine copper braiding utilizes less length of wick for each desoldering... MSRP: Now: $142.10 Add to Cart
