Heller Industries Inc. | https://hellerindustries.com/1505-mark-v-series-smt-reflow-oven/
: 132 cm Min/Max Board width:50-610 mm Maximum conveyor speed: 188 cm/min Temperature range: 60-350 °C Accuracy of Temperature Controller
Heller Industries Inc. | https://hellerindustries.com/smt-reflow-ovens/small-footprint-reflow-oven/
: 132 cm Min/Max Board width:50-610 mm Maximum conveyor speed: 188 cm/min Temperature range: 60-350 °C Accuracy of Temperature Controller
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/07/last-will-of-bga-void.pdf
temperature zones. The conveyor speed was 102 cm per minute with a standard air atmosphere environment. The oven used the high convection setting, and the boards were placed on the rails. 167 The test vehicles were allowed to air cool after reflow and then
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2022/04/last-will-of-bga-void-1.pdf
temperature zones. The conveyor speed was 102 cm per minute with a standard air atmosphere environment. The oven used the high convection setting, and the boards were placed on the rails. 167 The test vehicles were allowed to air cool after reflow and then
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/07/00600-228.pdf
. By Marc Peo and Don DeAngelo 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 300 200 100 0 Minutes (slope degree/second) C el si u s Lead-free Profile Figure 2
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2022/04/00600-228-1.pdf
. By Marc Peo and Don DeAngelo 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 300 200 100 0 Minutes (slope degree/second) C el si u s Lead-free Profile Figure 2
GPD Global | https://www.gpd-global.com/pdf/doc/Dispense-System-Service-Guide-22290008G.pdf
Table of Contents Conveyor .........................................................................................................8.10 Facilities ...........................................................................................................8.17 Chapter 9: References Legacy Controls
GPD Global | https://www.gpd-global.com/co_website/pdf/doc/Dispense-System-Service-Guide-22290008G.pdf
dispensers, map the work area to opti- mize precision control and application using the GPD Global Precision Contour Mapping Calibration Kit. X X Conveyor speed If a conveyor is present, inspect for proper conveyor speed and adjust as necessary. Refer to
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2018/07/wpload.pdf
Settings by Zone Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8 200° 190° 190° 180° 180° 180° 235° 250° Belt Speed = 90 cm/min Figure 4: The temperature plot of the Profile Board provides a baseline to measure the temperature repeatability across
Heller Industries Inc. | https://hellerindustries.com/wp-content/uploads/2022/04/wpload.pdf
Settings by Zone Zone 1 Zone 2 Zone 3 Zone 4 Zone 5 Zone 6 Zone 7 Zone 8 200° 190° 190° 180° 180° 180° 235° 250° Belt Speed = 90 cm/min Figure 4: The temperature plot of the Profile Board provides a baseline to measure the temperature repeatability across
.gif)
winsouce.jpg)