Technical Library | 2023-08-14 20:45:11.0
The partnership of Design and Manufacturing is central to the process of bringing a product to market. The impact of problems in either of these stages can increase exponentially if they go unnoticed until after the product reaches the customer. Overstress Test (tests using stresses beyond the design limit of the product) is successful at uncovering such faults in both product design and the manufacturing process and insures the overall robustness of the product. The benefits of Overstress Test include ...
Technical Library | 2015-11-19 18:15:07.0
The move to lead free (Pb-free) electronics by the commercial industry has resulted in an increasing number of ball grid array components (BGAs) which are only available with Pb-free solder balls. The reliability of these devices is not well established when assembled using a standard tin-lead (SnPb) solder paste and reflow profile, known as a backward compatible process. Previous studies in processing mixed alloy solder joints have demonstrated the importance of using a reflow temperature high enough to achieve complete mixing of the SnPb solder paste with the Pb-free solder ball. Research has indicated that complete mixing can occur below the melting point of the Pb-free alloy and is dependent on a number of factors including solder ball composition, solder ball to solder paste ratio, and peak reflow times and temperatures. Increasing the lead content in the system enables full mixing of the solder joint with a reduced peak reflow temperature, however, previous research is conflicting regarding the effect that lead percentage has on solder joint reliability in this mixed alloy solder joint.
Technical Library | 2023-08-14 21:16:13.0
Outline Introduction Objectives Hardware to be assessed COTS Xilinx and Microsemi ProASIC Boards Advanced CCGA/Virtex-5Daisy Chain Package (Kyocera) Assembled Advanced SMT packages (PBGA) COTS GoPro Camera Experimental Details Test Results/Discussion Summary Acknowledgements
| 1 |
winsouce.jpg)
.gif)
