Used SMT Equipment | X-Ray Inspection
This is a used NXR-1525 Xray System can be used to for PCB X-ray inspection of BGA and other SMD Devices. It is a high resolution X-ray system that can show inner layer traces of the Circuit Board. The date of manufacture is September 1999. It
Used SMT Equipment | Pick and Place/Feeders
FEATURES ▶Higher productivity and quality with printing, placement and inspection process integration▶For larger boards and larger PCBs up to a size of 750 x 550 mm with component range up to L150 x W25 x T30 mm▶Higher area productivity through dual
Used SMT Equipment | Soldering - Reflow
KVMS have available for immediate delivery: ONE (1) SMT-Wertheim Reflow system model QPM This unit has been cleaned. It has been serviced and tested and is ready to go straight into production. SMT Quattro Peak M N2 Vollkonvektions
Used SMT Equipment | Soldering - Reflow
BTU Pyramax in exceptional condition * 7 Zones of 98 inch heated tunnel * Pb free * Edge Pin Chain Conveyor * Left to Right product flow * Single Hide-Away Center Support option * Programmable Width Adjust * Smart Tracker SMEMA * 3 I
Used SMT Equipment | Circuit Board Assembly Products
10W CO2 Laser marker from IPTE. This laser system comes with an in- and out-feed conveyor as shown on the picture below - Year of manufacturing: 2005 - Including software & manual - Several Spare parts - 100% working, tested by Promass. Spec
Used SMT Equipment | General Purpose Equipment
Apply The Wave Solder Outfeed Conveyor is used to unload PCBs from the inclined conveyors of wave solder and to then lower the soldered boards to a standard conveyor height. The angle of the shorter inlet section can be adjusted to match the angl
Used SMT Equipment | Coating and Encapsulation
PVA UV2000 Curing Oven Brand: PVA Model : UV2000 Serial #: U1033 Year: 2000 Type: UV Curing Oven Specifications: Number of Lamps: 2 Process Flow Director: Left to Right PIP Sensors: 4 (entry side of left conveyor, Left and Right sides of U
Used SMT Equipment | In-Circuit Testers
Agilent M9502A AXIe 2-Slot Chassis The Agilent-Hp M9502A AXIe Chassis is fully compatible with the AXIe 1.0 specification. It includes an embedded system module (ESM) that does not take up an instrument slot. This system module performs the cha
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
Used SMT Equipment | Soldering - Reflow
The SMRO-4000 Scirocco Reflow oven has been developed for reflow soldering of Hybrid boards, SMT boards and Curing Glue or thin film pastes. The machine is developed for medium to large series of assembly. The Scirocco is based on hot air convection.
.gif)
.gif)
