Electronics Forum | Wed May 22 10:27:23 EDT 2019 | emeto
Greg, this is a huge pitch. 0.16mm is safe for this size of part.
Electronics Forum | Wed May 22 12:00:13 EDT 2019 | gregoireg
Thanks. It starts to make sense. There is a formula at the bottom of this page: http://www.circuitinsight.com/programs/50456.html It says: Stencil Thickness = 2.64mil + 0.0831 * pitch of component in mil. for 1.13mm, that gives exactly 0.16mm. So,
Electronics Forum | Thu Sep 05 14:44:41 EDT 2019 | jbaez1
Looking for Pack Driver or driver unit 630 119 8361 from HSP4797 (Universal, Sanyo or Hitachi): Tag information: Pack Driver Model: D2890B S ver. 0.16 W ver. 0.00 Made in Japan
Electronics Forum | Thu Jun 19 02:28:42 EDT 2003 | Desmond Bezuidenhout
I assisted a company in the design and manufacturing of a +/- 700l cabinet utilizing a controlled nitrogen environment to purge. Any enquiry call +27 (0)16 9335747 or write to my mail.
Electronics Forum | Thu May 20 15:58:36 EDT 2021 | rsatmech
My product has 2.4Mil and 3.1Mil stencil. For both the stencil my SPI specification is set as 30% to 160% How this is calculated. Can anyone enlight me. Solder Paste type 5. Minimum opening is 0.16*0.18mm in stencil.
Electronics Forum | Mon Jul 07 13:33:40 EDT 2008 | realchunks
Most QFP 128s have a 0.16mm wide lead. Might have to modify your pads if you'r buying some odd ball part. But generally 0.2mm should be OK for this part. You may never get good toe wetting. Most QFPs are cut apart after plating, thus the toes are
Electronics Forum | Mon Mar 20 03:47:16 EST 2006 | Adrian
Hi guys, Has anyone ever had experiance with a Vision Master 150 ?, we have 2 onsite and I am trying to get accurate BGA paste height measurements from this machine, but both the machines are giving me results with huge variations, like +/- 0.2 thou
Electronics Forum | Wed Jan 19 22:28:20 EST 2000 | Dave F
Taking things from a slightly different angle: Cost of assembling various packages based on volume: C/R placement: |$0.01 to 0.04 per part SOIC: | $0.03 PLCC based on lead count: | 20-39 $0.16 | 40-59 $0.18 | 60-79 $0.20 | 80-
Electronics Forum | Mon Feb 21 13:35:04 EST 2005 | pmdeuel
we have a HSP 4796, and have had placement issues with 0402's. If you can rule out global correction, rev'ed boards and a loose nest or a lack of support under the board. Look at placement before reflow. If alignment problems are present before oven
Electronics Forum | Thu Jun 20 23:28:15 EDT 2019 | SMTA-David
How can I upload image to this forum? I can show you the pad layout. I am thinking maybe too much solder. I used 0.16mm thick stencil but notice many us 0.12mm thickness. Also, cream layer is 100% of pad surface, I know for fine pitch parts it is r