Electronics Forum | Wed Aug 17 08:49:51 EDT 2005 | alandra516
Call Techniquip. Tey helped me out last time I had that problem for unser 1000.00
Electronics Forum | Thu Sep 27 17:53:42 EDT 2007 | flipit
Cirris are inexpensive. About $1000.00 for 128 points. Cab buy on Ebay used.
Electronics Forum | Wed Feb 01 10:13:50 EST 2006 | bsteffen
I know exactly what you are going through. One example, I needed a flux pump assembly. Vitronics price, about $1000.00. Going through the OEM (Fluid-O-Tech) the same assembly was $218.00. Oh and God forbid that you actually have to call Vitronics an
Electronics Forum | Tue Jun 15 16:16:29 EDT 2004 | Igor
Our research group is looking for a more efficient method of coating a small piece of sheet metal. We have a 1.5cm x 1.5cm very thin sheet of metal that we are coating with liquid epoxy, using a brush that was provided. This method has become unacc
Electronics Forum | Wed Dec 01 19:21:15 EST 2004 | cmiller
You can make one out of a stainless steel tank pretty easy. Cost maybe $1000.00. You will need some hot plate type heaters and some copper tubing with a water flow source to keep the vapor down in the tank. We used two fluid types so one blanketed t
Electronics Forum | Thu Mar 31 23:14:18 EST 2005 | Steve
Russ if your asking me if covering the surface of the granite defeats the purpose then I'm lost. An ionizer is a very good suggestion but they are not inexpensive. If the table is grounded and the metal bars are on a grounded mat, laminate etc. then
Electronics Forum | Thu Apr 28 11:13:33 EDT 2005 | cyber_wolf
We currently have Fuji's(IP3's included) and Mydata's in our SMT area , so training is not an issue. The reason I was thinking of an IP3 is because they seem to be available for 50K or so. We cannot afford to loose any mag positions on our Mydata's t
Electronics Forum | Fri Oct 03 16:51:06 EDT 2008 | waveroom
If this is a one time rework might I suggest farming it out? 100pin QFP can be taken off no problemo.. Putting it back down properly and then hand soldering??? I wouldn't want that job. You need excellent placement and imaging and your not going to
Electronics Forum | Thu Oct 05 12:51:27 EDT 2006 | john_smith
cn, Currently we have a DEK265GSX a DEK Infinity and a MPM UP3000 printers and previously had MPM Accuflex,MPM UP1500 and MPM AP24s. No advice for the UP3030. We always had to work on all of the MPM printers for one thing or another and every time we
1 |