Electronics Forum | Fri Aug 03 14:45:42 EDT 2001 | neil
Whew! I finally finished the archives (and they weren't that bad). All postings to the smtnet forum from 12/5/97 to present are available and fully searchable. thanks for the kick in the @$$ dave, I needed it. -neil
Electronics Forum | Thu Jun 27 23:49:40 EDT 2013 | cedric77
I had a solder paste SAC305 T4, with flux loading of 11.5%. After retrieivng out from fridge(5deg) after 48hrs, the paste turn dry (like dry mud? and after double checking the flux loading it becomes 12.5%. Has anyone ever experience this or any opi
Electronics Forum | Thu Apr 15 14:29:09 EDT 2004 | Debi
What are diffrerences between DEK 248 and MPM Microflex? We are thinking about off-line screen printer with vision and wiper. When i compare specification MPM has better accurancy 12,5um and DEK 248 25um so one point for MPM. MPM is a new constructio
Electronics Forum | Mon Feb 01 14:04:12 EST 2010 | bing007
Found the problem. Thanks for the pointers. I had set the voltage to 5.00 volts as it was reading 4.86 volts. I still had the problem. A slghtly burnt wire going into the spade connector on the back of fuse holder 12 (5 volts). The reason the voltage
Electronics Forum | Tue Sep 14 01:43:25 EDT 2021 | kumarb
jane@szjiln.com">jane@szjiln.com">jane@szjiln.com/</a> <a class=roll href="mailto:janeszjiln@gmail.com">janeszjiln@gmail.com">janeszjiln@gmail.com">janeszjiln@gmail.com </a>Cell:+86-136325247
Electronics Forum | Mon Apr 07 14:03:27 EDT 2003 | ksfacinelli
We have a client we would like to have switch from leaded can components to surface mount versions. We currently are utilizing these on a number of designs but his concern is in the area of reliability of the solder interface. The caps generally ha
Electronics Forum | Fri Dec 12 01:06:02 EST 2003 | kenny
Dear folks; I am currently looking a PCB manufacturer who can fabricate PCB with the following specification:- Board sizes: _20000__ x _20000__ mils Thickness: 125 mils PCB material: FR4 Surface finish: 30 microinches Gold over 200 micro inches Nic
Electronics Forum | Sat Mar 18 02:21:31 EST 2006 | pavel_murtishev
Good morning, Once again a met annoying solder beading issue while producing board with PLL (leadless, contacts from the bottom side of the package). Board has very high placement density and beads appear near PLL package only. This package is finep
Electronics Forum | Tue Aug 26 16:24:18 EDT 2008 | rway
We currently use a YesTech M1 system and we are looking to buy another. Two important areas to look at when pursuing AOI equipment: 1) Camera resolution 2) Light sources Depending on your needs, camera resolution can be important depending on the si
Electronics Forum | Wed Jan 06 19:43:15 EST 1999 | Steve Gregory
Hey All you Einsteins out there!! I gotta' problem...('course you do Steve, or you wouldn't be bugging the TechNet now would you?) I had a phone call from a acquaintance of mine wanting to bring two prototype boards over to rework a BGA socket, (act
