Electronics Forum | Tue Dec 13 10:34:58 EST 2011 | kkay
We are looking into the Cluso first article system and would like to know if anyone is using it and how they like it. Also is there any other companies with similar systems?
Electronics Forum | Thu Dec 15 15:23:18 EST 2011 | jlawson
Take a look at AOI Systems from UK...They offer similar systems but also offers some AOI inpsection features not just first article....http://www.aoisystems.com/
Electronics Forum | Sun Apr 23 11:22:37 EDT 2023 | kirill
Well, title. There are couple different FAI machines, but from what I've seen, there is some application that floating around the internet that allows you to scan the assembled board before reflow on AIO machine for JPG file, and then run in into FAI
Electronics Forum | Tue Apr 03 15:47:43 EDT 2018 | davef
Just to be clear: * First Article inspection is the qualifying of new product/processes and changes. Automotive PPAP approval is a good example. * First Piece inspection is the first off when a process is started.
Electronics Forum | Thu Apr 05 22:44:49 EDT 2018 | jandon
We have Quins Professional in use which is quite handy for first article/piece inspection. You can easily compare assembled board to the pick&place file and placement drawings.
Electronics Forum | Wed Apr 04 10:32:10 EDT 2018 | dleeper
At an EMS I used to work for, our process for first article inspection was to have a human technician do a point to point comparison between the BOM and the PCB. They would verify component part #s were correct per the location, correct polarity and
Electronics Forum | Wed Apr 04 06:36:56 EDT 2018 | sophyluo1985
Hi Dave, I meant the First piece inspection when a process in started. How did you do this first piece inspection ?
Electronics Forum | Wed Apr 04 09:12:41 EDT 2018 | davef
A first piece inspection does two things: 1 Verify that the part meets the requirements on the drawing and specification 2 Document the inspection results
Electronics Forum | Tue Apr 03 01:56:37 EDT 2018 | sophyluo1985
Hi All, Anyone want to talk about how do you did the 1st sample inspection in your SMT department? I mean once you want to produce a new product. After the material on board, and before mass production, we always need to do 1 or 2 sample to test if a
Electronics Forum | Thu Apr 05 06:59:30 EDT 2018 | philc
Here, there are two possibilities - either it is a new board to us (ie built elsewhere previously) or it is a new product for the company requesting the build. If new to us only, ask for a sample PCB. You will need CAD data for pick & place machines
PCB Electronics Manufacturing Automation Software for EMS, OEM & ODM manufacturers. Over 3000 customers worldwide!
116A Research Dr.
Milford, CT USA
Phone: (888) 486-4246
