Electronics Forum | Fri Jul 23 04:29:38 EDT 1999 | MK
Can anybody recommend low capacity PCB manufacturing equipment for labaratory or research/designers center. Output 2-10 sqr. m. per shift; required working space 30-100 sqr. m. Spent too much time looking fr this. Thanks in advance.
Electronics Forum | Mon Jun 18 01:23:07 EDT 2001 | gregH
I have a 10-pin single in line connector that is reflowable. Pin size is 1.0mm and my pcb drill size diameter for the pin is 1.5mm. is it okay for pin in hole process ? I have only 2 pcs of pth components and they are the 2 10 SIL connectors. What's
Electronics Forum | Wed Jul 25 10:27:51 EDT 2018 | mefloump
We have an Ersa Powerflow N2. It's a very well built machine with excellent support. We run it (2) 10 hr shifts per day, 4 days a week. Having the full nitrogen tunnel has greatly reduced dross and improved hole fill. This replaced an Electrovert Vec
Electronics Forum | Mon Aug 24 21:16:57 EDT 2020 | smith88
I am trying to teach a class and the question came up about loss of metalization of the Earth pad on a chip filter. This pad is on the side of the component. I can not find a IPC call out for this type of side termination other than 3 or 5 sided 9.1.
Electronics Forum | Fri Jan 18 07:01:41 EST 2008 | cyber_wolf
Hi, The solenoid that sits on top of the vacuum generator on my Fuji bare board loader is croaking slowly. Fuji will only sell me the entire generator assy. which cost more than I paid for the loader. The only markings on the solenoid are DC24V 540
Electronics Forum | Thu Aug 04 22:02:25 EDT 2011 | fujiphil
IP3 camera calibration, you need the following: 1. Part camera resolution Jig. 2. 10mm nozzle for nozzle centering. 3. Button jig (skip). 4. Glass board and Glass parts. 1. Conduct the Camera resolution. Set the following Delta values: X=+/-0.1mm;
Electronics Forum | Wed Aug 21 17:44:32 EDT 2002 | davef
Splitting hairs, I expect SIR of all solderability protection, including OSP, to decrease after reflow. What�s more, I expect the SIR of all solderability protection to pretty much decrease over time. The �comb pattern� test specimens meet requirem