Electronics Forum | Tue May 22 11:18:55 EDT 2012 | patrickbruneel
A picture of the top side of the connector would be helpfull too. I assume the 2 large leads in the front are part of that connector too.
Electronics Forum | Thu Sep 08 13:14:11 EDT 2016 | claudea2
Hello, we have an Ekra E4 that we bought used and the stencil wipe never worked. We found that the air tubing for the up (black)& down (blue) of the wipe roll is missing. There are 2 push connectors for up and 2 for down to receive the tubes. Does an
Electronics Forum | Tue May 18 14:47:02 EDT 1999 | Dave F
| Looking at the full convection reflow oven market, I see two segments, high mass heater ovens (i.e. Electrovert Omniflow,...), and low mass heater ovens (i.e. Heller,...) | Did some of you guys did some testing on both types and what were your find
Electronics Forum | Tue Jun 11 15:56:43 EDT 2002 | mjabure
Actually F4G is a programming environment similar to panatools, not a machine, it stands for "Fuji 4th Generation". The connection being questioned is to the communication network, and yes with the proper hardware you should be able to connect more t
Electronics Forum | Wed Jan 05 09:24:53 EST 2005 | cyber_wolf
Well...here is what I can tell you: I have over $40K worth of bent A12,A13,A14 tools.Yes you heard me right $40K worth. (Since 1995) Mydata used to make a repair kit to fix them but decided to quit. They tell me the reason they quit making the kit i
Electronics Forum | Wed Jul 15 12:53:07 EDT 2009 | rwyman
Cabinets that utilize nitrogen or desiccator units are available that will accomodate the feeder so the parts don't need to be removed. Simply put the feeders into the cabinet at nite and remove them in the morning. Dr. Storage is one. A Google se
1 |