-MAC supplies high-quality instruments for analysis and thin film metrology: UV-Vis Fiber Optic Spectrophotometer, Measurement System for Thin Films, LCD and Wafer, Refractive Index and Thin Film Thickness Measurement System, Flow Injection Analyzer,
Industry Directory | Association / Non-Profit
Established in 1976, ETRI is a non-profit government-funded research institute that has been at the forefront of technological excellence for more than 25 years.
High Precision Dispensers - MAX Series (Non-Heated) Max Series is capable of a wide variety of dispense applications including MicroVolume, Solder Paste and Conductive Adhesive, Underfill, Surface Mount Adhesive, Dam and Fill, Encapsulations, LED En
New Equipment | Solder Paste Stencils
MPM UP2000 HiE Screen Printer Substrate treatment Minimum/maximum size 2"x 2"(50.0 mm x50.0 mm) to 20" x 16" (508 mm x 406 mm)(16 "or larger substrate requires special clamps
Electronics Forum | Wed Sep 28 03:58:05 EDT 2011 | Jacki
Hi All My company is doing PCB assembly.To save cost, we change our wave solder bath from SnAg to SAC 305. What is the pros and cons for using SAC 305 solder? And,will affect to our quailty? Thanks in advance.
Electronics Forum | Tue Oct 18 19:29:06 EDT 2011 | warwolf
hey Jacki we are looking at going from SAC305 to SN100C, if your looking to save cost it's a cheaper option. have a look into it.
Used SMT Equipment | Screen Printers
MPM Momentum+ Printer Substrate treatment Maximum plate size(XxY) 609.6 mm x 508 mm(24”x 20”) Segmented mode-Momentum Elite 457 mm x 508 mm(18"x20") Minimum Plate Size (XxY)
Used SMT Equipment | Screen Printers
MPM UP2000HiE PRINTER Substrate treatment Minimum/maximum size 2"x 2"(50.0 mm x50.0 mm) to 20" x 16" (508 mm x 406 mm)(16 "or larger substrate requires special clamps) Thickness rang
Industry News | 2019-08-21 16:55:59.0
MIRTEC will exhibit in Booth #305 at SMTA International. MIRTEC will showcase the latest advancements in their award-winning 3D AOI and SPI Systems at the two-day event.
Industry News | 2018-03-29 20:48:41.0
SMTA Europe announces Keynote Speaker Ralph Tuttle of Cree, Inc. on High Power LED Solder Joint Reliability at the “Electronics in Harsh Environments Conference” to be held in Amsterdam, Netherlands, on April 25th, 2018.
Parts & Supplies | SMT Equipment
YAMAHA KHY-M7760-A0X /NOZZLE YS12 305A316A SMT NOZZLE Accurate and durable Vacuum nozzle Abnormal type is available
Parts & Supplies | Chipshooters / Chip Mounters
YAMAHA KHY-M7760-A0X NOZZLE YS12 305A316A SMT NOZZLE
Technical Library | 2023-01-17 17:27:13.0
Reflow profile has significant impact on solder joint performance because it influences wetting and microstructure of the solder joint. The degree of wetting, the microstructure (in particular the intermetallic layer), and the inherent strength of the solder all factor into the reliability of the solder joint. This paper presents experimental results on the effect of reflow profile on both 63%Sn 37%Pb (SnPb) and 96.5%Sn 3.0%Ag 0.5%Cu (SAC 305) solder joint shear force. Specifically, the effect of the reflow peak temperature and time above solder liquidus temperature are studied. Nine reflow profiles for SAC 305 and nine reflow profiles for SnPb have been developed with three levels of peak temperature (230 o C, 240 o C, and 250 o C for SAC 305; and 195 o C, 205 o C, and 215 o C for SnPb) and three levels of time above solder liquidus temperature (30 sec., 60 sec., and 90 sec.). The shear force data of four different sizes of chip resistors (1206, 0805, 0603, and 0402) are compared across the different profiles. The shear force of the resistors is measured at time 0 (right after assembly). The fracture surfaces have been studied using a scanning electron microscopy (SEM) with energy dispersive spectroscopy (EDS)
Technical Library | 2023-09-07 14:38:31.0
A repeat customer specializing in high-technology interconnect, sensor, and antenna solutions, partnered with us to dispense small volumes of solder paste (Indium 10.1 SAC305 T6SG 78%m) onto backplane connectors – gold pads 0.175mm x 0.225mm. We performed a test requiring 0.200mm diameter or smaller dots to demonstrate the dispensing capability required.
High Precision Dispensers - MAX Series (Non-Heated) Max Series is capable of a wide variety of dispense applications including MicroVolume, Solder Paste and Conductive Adhesive, Underfill, Surface Mount Adhesive, Dam and Fill, Encapsulations, LED En
Momentum was designed and built to be a no-nonsense production machine. Cost-efficient and featuring a modest footprint, it grows with the user; innovative patented features can be added on or retrofitted as needed as the user’s throughput dema
Career Center | Denton, TX-Texas USA | 2017-05-06 20:13:59.0
Engineering,Production,Quality Control
Career Center | Lakewood, California USA | Engineering,Maintenance,Management,Production
Quality conscience, detail oriented, manufacturing engineer, with a hands on approach to overall process improvement and development. Motivated with excellent communication skills and a dedicated team player. Qualifications include: � Safety /Diver
Effect of Soldering Parameters on Reaction Kinetics and Phase Transformations of SAC 305 Solder Effect of Soldering Parameters on Reaction Kinetics and Phase Transformations of SAC 305 Solder As technology becomes increasingly reliant
International Sn3.0Ag0.5Cu (SAC305) is the most popula
ASYMTEK Products | Nordson Electronics Solutions | https://www.nordson.com/en/divisions/sealant-equipment/products/meters-and-metering-systems/305-1-part-shot-meter
Servo-Flo 305 1-Part Shot Meter Nordson SEALANT EQUIPMENT Corporate | Global Directory | Languages Division Only All of Nordson Products Valves Meters
Surface Mount Technology Association (SMTA) | https://www.smta.org/knowledge/proceedings_abstract.cfm?PROC_ID=5459
Electromigration Behavior of SAC(305) / SnBiAg Mixed Solder Alloy Assemblies 中文 MEMBERS LOGIN Membership Become a Member! Renew Membership About SMTA Ambassadors Benefits Classifications Member Directory Member Directory Corporate Suppliers Corporate Users Consultants List Advertisers Update Your Info
