Industry Directory | Manufacturer
United Adhesives makes special adhesives, coatings, potting gels, sealants, various conductive adhesives, and optical adhesives for applications in electronics, semiconductors, and telecommunications.
Industry Directory | Manufacturer / Other
ISO certified global manufacturer and supplier of light-curable adhesives, coatings, oligomers, dispense systems, light-curing equipment, and technical consulting for the industrial, medical, and electronics industries.
Thermally conductive silicone adhesive sealant. 1-Part RTV, neutral cure, fast cure, fast on-set of adhesion for PC board & component heat sink, part fixturing, vibration & moisture insulation, as well as the adhesive sealing of components.
Our Corrugated Flange Protectors are made from a lightweight form of Black Polycor Plastic which provides a good level of strength and durability throughout its uses. Thanks to the corrugated structure of these flange covers, these work well to
Electronics Forum | Fri Apr 28 09:51:10 EDT 2000 | Erik
I'm looking for an adhesive to attach a metal can to the PCB to stop it from vibrating. The temperature spec is -50C(-58F) to 85C(62.8F). Thanks for the help Erik
Electronics Forum | Fri Feb 17 12:50:31 EST 2006 | Cmiller
DaveF, would the adhesive be strong enough to keep the part from vibrating free over time? DO you know any part numbers? These inductors have quite a high mass. I would profer to lay them down on thier side but there is not enough room.
Used SMT Equipment | Adhesive Dispensers
Screw , nut and bolt coating machine TH-2004l3 Features: Thread locking sealant equipment are a cost effective and superior alternative to lock washers, locking threads, and studs. Prevent loosening due to vibration or thermal expansi
Used SMT Equipment | Adhesive Dispensers
Fuji GL541E *Basic Specifications Cycle time 0.09 seconds/dot Travel distance - X-axis within 8mm Y-axis within 6mm Needle up/down distance of 8mm Application time: 0.05 seconds Dispensing accuracy: +/- 0.15mm in th X and Y directions (3 sigma)
Industry News | 2018-02-06 20:38:21.0
SMTA Europe is excited to announce the finalized program for Electronics in Harsh Environments Conference. The event will be held April 24-26, 2018 at the Crowne Plaza Amsterdam – Schiphol in Amsterdam, Netherlands.
Industry News | 2017-05-08 12:21:48.0
Ensures reliable feed and reduces adhesive clumping that results in downtime
Parts & Supplies | Pick and Place/Feeders
JUKI SMT Mounter feeder / feeder / feeding gun / Feeder / Stick Feeder / Stack Stick Feeder: Part Number Part Number Product Name Description 40081758 CF03HPR 8mm TAPE FEEDER UNIT FOR 0603 40081759 CF05HPR 8mm TAPE FEEDER UNIT FOR 1005 40081760
Parts & Supplies | Assembly Accessories
Detailed Product Description Brand: JUKI Part Name: Tape Feeder Unit Part Number: E30037060B0 Model: FF12FS Double Advance: 8mm 12mm Single Advance: 4mm E30037060B0 FF12FS 12mm TAPE FEEDER UNIT SINGLE ADVANCE: 4mm Double Advance 8mm 12mm Desc
Technical Library | 2015-12-31 15:19:28.0
Today's consumer electronic product are characterized by miniatuization, portability and light weight with high performance, especially for 3G mobile products. In the future more fine pitch CSPs (0.4mm) component will be required. However, the product reliability has been a big challenge with the fine pitch CSP. Firstly, the fine pitch CSPs are with smaller solder balls of 0.25mm diameter or even smaller. The small solder ball and pad size do weaken the solder connection and the adhesion of the pad and substrate, thus the pad will peel off easily from the PCB substrate. In addition, miniature solder joint reduce the strength during mechanical vibration, thermal shock, fatigue failure, etc. Secondly, applying sufficient solder paste evenly on the small pad of the CSP is difficult because stencil opening is only 0.25mm or less. This issue can be solved using the high end type of stencil such as Electroforming which will increase the cost.
Precision Fine Pitch Aperture Cleaners Thousands of dollars less than fully-automatic cleaners Low solvent usage and running costs Fast cleaning time of 1-3 minutes Minimal waste disposal Portable unit can be used directly on the screen printe
Rugged, fast and consistent – even with high inlet pressures Dos GP systems are the first choice for applications requiring 1C, high viscosity, unfilled, non-abrasive potting material, making them the best choice for applying continuous beads.
| https://www.eptac.com/faqs/ask-helena-leo/ask/component-encapsulation
.html You should be able to find the materials you need at these locations. Now if you are trying to secure components to the board to help with the security of the component to prevent vibration failures, then you would have to use an epoxy type of material and these can be found at: http
Blackfox Training Institute, LLC | https://www.blackfox.com/ipc-certification/ipc-specialist/ipc-j-std-001-cis-with-space/
) 1 day Study of the J-STD requirements applicable to the assembly and soldering of Wires and Terminals, and practical exercises for development and demonstration of soldering skills. Module 3 – PCB & Adhesives (optional
.gif)
