Electronics Forum | Fri Aug 03 17:00:57 EDT 2001 | mparker
Start with a definition of what you expect the AOI to achieve at each station. Will your in-line machine be post print? Place (pre-reflow) or post reflow? Rather than buy one very expensive machine to put at the end of the line, maybe a couple of
Electronics Forum | Tue Jan 03 14:23:16 EST 2006 | Gary Kemp
Can anyone provide for me their prospective regarding AOI vs. electrical test? Which is better for generating REAL benefit in providing customer with a marked increase in defect free product? Thanks for any input you can provide.
Electronics Forum | Wed Jan 04 09:05:53 EST 2006 | stepheniii
Your process makes a bigger difference. What I have seen is ICT done early is better than AOI done more than a half shift later, and AOI done early is better than ICT done more than a half shift later. For high mix/low volume, I would go with AOI whi
Electronics Forum | Tue Jan 03 15:16:53 EST 2006 | Cmiller
In circuit testing is expensive up front because of the fixture cost but the tests are fast. AOI programs can be develpoed in less than a day but take longer to run. If you have good test coverage, in circuit would be a better choice in my opinion-if
Electronics Forum | Wed Jan 04 12:48:34 EST 2006 | pjc
In-Circuit Test is the best method for ensuring solder joint connections. It is a much more reliable than AOI. An ICT machine can ensure solder connections are made for array package devices such as BGA, PGA, etc... AOI is best for component I.D.- is
Electronics Forum | Wed Jan 04 14:59:41 EST 2006 | AOI
I have used all of test and inspection techniques available out there: AOI, AXI, Flying Probe, ICT, and FCT. The reality is that they all have a place in manufacturing based on the type and complexity of product you bild, the industry it is intended
Electronics Forum | Thu Oct 30 10:16:22 EDT 2008 | muarty
I am looking for a straight forward Gage R&R test I can use when evaluating AOI equipment. Anyone carried out similar? Thanks in Advance
Electronics Forum | Wed Dec 13 14:17:26 EST 2017 | emeto
For the ovens you run the profiler and you compare graphs. For the AOI you should run these golden boards(boards that you keep for AOI test - might have intentionally implemented defects) once in a while and make sure you are getting the same results
Electronics Forum | Sat Feb 01 04:49:59 EST 2003 | testing
Hi, We currently have several AOIs on our production/test line which I feel as an engineer, are not being used to their true potential. Does anyone have any ideas on how I can improve their use i.e SPC, Placement in the production line etc since we
Electronics Forum | Wed Dec 13 02:17:07 EST 2017 | am
Guys, What are the best effective tests methods to show capability and repeatability of reflow ovens and AOI machines?
.gif)
