New Equipment | Board Handling - Storage
KINGSUN Automatic Loader and Unloader Model 250 330 390 460 PCB loading time Approx 6 seconds Magazine change-over time Approx 30 seconds Power supply 100-230V AC (customized), single phase, M
New Equipment | Assembly Services
SMT Xtra provides a full range of original or high quality replacement Spare Parts, Nozzles and Consumables for... SMT Placement Machines. SMT Screen Printers. SMT Dispensers. All of our Spare Parts, Nozzles and Consumables are qualit
Electronics Forum | Sun May 23 11:02:45 EDT 1999 | M Cox
Any suggestions on how to maintain Adhesive dispensing nozzles??? They seem to plug up over night and it is starting to get on my nerves. We have tried leaving the nozzles in the machine, removing them and soaking in alcohol, blowing them out with
Electronics Forum | Mon May 24 13:06:12 EDT 1999 | Deon Nungaray
| | | Any suggestions on how to maintain Adhesive dispensing nozzles??? They seem to plug up over night and it is starting to get on my nerves. We have tried leaving the nozzles in the machine, removing them and soaking in alcohol, blowing them o
Used SMT Equipment | Pick and Place/Feeders
Assembleon Topaz XII Pick and Place System, Includeds ATS Tray Loader Type PA269923, Front FES and Read Fixed Feeder Bar, Includes (2) FES Feeder Trolley Carts, (2) Upward Looking Cameras, Flying Nozzle Changer, 29996 Hours, Version 1.18 AUCTION IT
Industry News | 2012-04-06 15:32:39.0
GPD Global, a manufacturer of precision fluid dispensing systems for high-volume 24/7, low-volume/high-mix and R&D production, announces the global release of its PCD4 Dispense Pump after its successful release and testing in the North American market.
Industry News | 2010-12-07 14:53:07.0
GPD Global announces that its Positive Cavity Displacement (PCD) technology is proven with silver-filled electrically and thermally conductive adhesives.
Parts & Supplies | Pick and Place/Feeders
Which series nozzles could be used for Phlips Topaz and Emerald machine As we know, many parts are compatible for Yamaha and Philips machines, but some models their nozzles are not generic.So which series nozzles could be used for Phlips Topaz and
.jpg)
Parts & Supplies | Pick and Place/Feeders
BTW, we have sepcialzied in SMT field over 12 years and support one-stop SMT solution for our customers. Including SMT equipment and spare parts, such as Loader and Unloader, Reflow oven, Nozzle, feeder, motor, PCB board ect. We can also customize
Technical Library | 2017-12-27 22:52:43.0
To compensate for the insufficiency and instability of solder paste dispensing and printing that are used in the SMT production process, a noncontact solder paste jetting system driven by a piezoelectric stack based on the principle of the nozzle-needle-system is introduced in this paper, in which a miniscule gap exists between the nozzle and needle during the jetting process.
Technical Library | 2021-06-15 18:36:00.0
To compensate for the insufficiency and instability of solder paste dispensing and printing that are used in the SMT (Surface Mount Technology) production process, a noncontact solder paste jetting system driven by a piezoelectric stack based on the principle of the nozzle-needle-system is introduced in this paper, in which a miniscule gap exists between the nozzle and needle during the jetting process. Here, the critical jet ejection velocity is discussed through theoretical analysis. The relations between ejection velocity and needle structure, needle velocity, and nozzle diameter were obtained by FLUENT software. Then, the prototype of the solder paste jetting system was fabricated, and the performance was verified by experiments. The effects of the gap between nozzle and needle, the driving voltage, and the nozzle diameter on the jetting performance and droplet diameter were obtained. Solder paste droplets 0.85 mm in diameter were produced when the gap between the nozzle and needle was adjusted to 10 _m, the driving voltage to 80 V, the nozzle diameter to 0.1 mm, and the variation of the droplet diameter was within _3%.
BTW, we have sepcialzied in SMT field over 12 years and support one-stop SMT solution for our customers. Including SMT equipment and spare parts, such as Loader and Unloader, Reflow oven, Nozzle, feeder, motor, PCB board ect. We can also customize
VP-2800HP-CL62-2H 2 heads 3x Analog cameras / HD camera upgrade possible 6 slot nozzle changer Optional dispenser head 62x 8mm CL Feeder slots in 2 bays 35x 8mm push feeder on West side included Optional paste / glue dispenser module Option
Lewis & Clark | http://www.lewis-clark.com/product-tag/fnc-nozzles/
FNC nozzles Archives - Lewis and Clark Skip to content My Cart: 0 View Cart Checkout No products in the cart. Subtotal: View Cart Checkout Lewis and Clark We Discover Equipment Opportunities NH: 603-594-4229 FL: 813-888-7436 sales@lewis
GPD Global | https://www.gpd-global.com/pdf/dispense/Dispensing-Systems-and-Pumps-Overview.pdf
configurations for cavity dispensing. Nozzles are made from ceramic or carbide. Easy Setup & Cleaning The NCM5000 is easy to maintain. A complete pump consists of 3 primary parts: the main body and two wetted parts - a diaphragm and nozzle plate. The wetted parts
