Electronics Forum: axhm450kc-gfh and motor (Page 1 of 3)

Transmitter and Recievers

Electronics Forum | Thu Oct 21 16:08:16 EDT 2004 | Dzyna Kid

Does anyone know of any resources I could investigate to make a small circuit that would consist of a transmitter, receiver, and a motor. I want to be able to press a button on a remote control and that would make the motor turn on, then I want to b

Transmitter and Recievers

Electronics Forum | Fri Aug 05 14:42:06 EDT 2005 | B R Proctor

hi their In south africa, we manufacture recievers that work with a remote. They can be used in a simple circuit to control a motor. Best regards Barry Proctor e-mail :zaza@wol.co.za

PFMEA and SPC/Cpk program

Electronics Forum | Thu Mar 02 15:42:30 EST 2006 | russ

in addition to Amols comments I also like Minitab. For FMEA Ford motor Company has a great FMEA program

Tp9 and Tp9 ufp

Electronics Forum | Tue Oct 25 15:03:48 EDT 2011 | sjs2303

Hi Bert, For your second issue, are the tools well lubricated? If not the Midas head can fail to grab the tool and can generate the z motor error. Doing this followed by a base-centre level measurement should resolve your problem. Steve

Pick and Place tutorials

Electronics Forum | Wed Oct 01 10:20:48 EDT 2003 | caldon

www.smtmag.com has Step-by-step articles written by OEMS...Just type in Step-by-step into the search engine on the website...sit back and enjoy the links. Also, http://www.smtinfocus.com has a brief snip-it as well. You may want to do a search for

Tp9 and Tp9 ufp

Electronics Forum | Mon Oct 24 16:24:53 EDT 2011 | smdbert

Hello, My name is Bert i'm working by LéTÉ with two mydata smd machines and have sometimes several problems ,most of the problems try to solve it by myself but sometimes the boss also helps and i write the errors in map but first of all 4 questions

Tp9 and Tp9 ufp

Electronics Forum | Wed Oct 26 11:02:41 EDT 2011 | dyoungquist

TP9 machines are good, but old machines. We ran a TP9 for many years. As the machine got older it required more and more maintenance and had more frequent small issues similar to what you are seeing. We only saw 1 of your 4 issues specifically whi

MPM Accuflex problems and errors

Electronics Forum | Tue Mar 30 06:27:22 EDT 2010 | ristikas

It happens on the middle of the stecil cleaning. The camera and the cleaner will stay under stencil in half way back. Then machine asking the initate the motors. If to press initate then the pcb stopper will hit the rails. Usually we move camera and

Panasonic MV2C pick and place.

Electronics Forum | Fri May 22 16:35:21 EDT 2020 | gabriel1blue

Thank you! I think the rotary counter motor went out or the belt broke? The left side is moving fine the right doesn't move at all. If I push the right side very close to origin point some times the machine will complete the process. I'll check that

BTU Pyramax 125N and 150N

Electronics Forum | Wed Apr 21 14:32:52 EDT 2010 | remullis

These ovens maintain good profiling as long as you stay on top of maintenance. I had 4 150's and 1 125. The biggest headache is keep the plenums cleaned (very messy). Also the blower motors have been replaced a few times on them as well. If I were yo

  1 2 3 Next

axhm450kc-gfh and motor searches for Companies, Equipment, Machines, Suppliers & Information

Sell Used SMT & Test Equipment

ONLINE IPC Training & Certification
Panasonic CM402, CM602, DT401

Easily dispense fine pitch components with ±25µm positioning accuracy.


Best Reflow Oven