Electronics Forum | Tue Jul 23 11:12:08 EDT 2002 | yngwie
Hi Experts, Anybody know whatis the alternative to the PCBA's barcode, should you don't have a space on your highly populated PCBA ? This refer to the boards' serial number, be it for tracebility purposes or shopfloor data collection purposes. I hav
Electronics Forum | Thu Jul 08 17:57:31 EDT 2004 | codestar
We are looking to automate the pick and place process when it comes to the barcode labels or license plates located on the component reels. Now, prior to pick and placement starting, the reel labels have to be scanned. I have been advised a Fuji CP
Electronics Forum | Sun Feb 22 15:53:13 EST 2004 | Dreamsniper
Hi, Try using or creating a simple data collection system using MS Access...Try this idea: operator inspects the board, then scans the PCB barcode. Then enters the fault found using the codes you are using in your sheet. It's a bit laborious but it
Electronics Forum | Mon Mar 09 16:27:46 EDT 2020 | oxygensmd
Sadly, without line controller software you won't be able to load jobs to your machines. Check your mails later.
Electronics Forum | Wed Mar 18 16:15:49 EDT 2020 | emeto
Katrina, if the machine will zero on its own, there is nothing wrong with machine itself. You can now look into network cards in both line computer and line PC.
Electronics Forum | Wed Mar 18 18:22:32 EDT 2020 | sportsradar
I have replaced both cards on the machine and the card in the PC. I have also replaced the cable. I can see where the machine is sending the request for data (by the screen shoots above). And I can see the PC is seeing something from the machine by
Electronics Forum | Mon Mar 09 16:28:48 EDT 2020 | sportsradar
Hello Sarason, Unfortunately the machine is no longer supported and we are such a small company we can not afford to replace this machine. Thank you for your advise, I will check for additional parts stuck in the machine (long shot but worth the time
Electronics Forum | Mon Mar 09 16:30:42 EDT 2020 | sportsradar
We have the software and our PC has been running the machine for approx 10 years. I just don't know why all of a sudden it decided to have this problem. :( Also I have the software if you think I can reinstall from the diskettes. Will check, and ag
Electronics Forum | Mon Mar 16 14:08:44 EDT 2020 | sportsradar
Thank you for your reply. So the machine should preform a zero set without the line controller being turned ON? I never tried starting the machine first so I am unfamiliar with this. Thank you again. This community is great. Sincerely, Katrina
Electronics Forum | Tue Mar 17 09:09:34 EDT 2020 | emeto
You should be able to operate/troubleshoot machine on its own. Not sure if you have to switch some key on the back to change the mode, or it will initialize on its own using the last program that has been loaded....it's been awhile. Line computer dow