technical parameter Model: s1200 (special type for LED light bar) Overall dimension (L × w × h): 1650 × 620 × 1550 (mm) Platform size: 320 × 1300 (mm) PCB size: 250 × 1250 (mm) Applicable template size: 550 ×
Product features: The servo system is convenient and accurate for positioning. The Japanese THK guide rail and Taiwan STK variable frequency motor are used to drive the scraper base to ensure the printing accuracy. The printing scraper can be rota
Electronics Forum | Thu Dec 14 04:02:40 EST 2017 | spoiltforchoice
"I would expect that any intelligent feeder > enabled machine would pull the correct part no > matter where it is placed on the machine (not > forced by the program)" > > this is true, but you > have to tradeoff the setup time vs production > t
Electronics Forum | Sat Jun 05 00:27:54 EDT 1999 | Dean
To you all for comment and summary, The following things I like without endorsing (PCB/PCBA stuff - outside the great women in my life [many] and without [mostly]): 1) A good set of design rules 2) A good set of
Options: (1) IR-preheating, bottom side segmented pin/chain and roller conveyor for versaflow with double soldering module programmable conveyor width adjust (4) convection preheating top side automatic solder wire feeder, solder
Industry News | 2008-04-07 22:54:27.0
DORSET, UNITED KINGDOM - March 31, 2008 - Europlacer, a designer and manufacturer of comprehensive SMT placement systems for the global electronics industry, announces that it has been awarded The 2008 NPI Award in the category of Multifunction Pick-and-Place for its impressive iineo SMT platform. The award was presented to the company during a Monday, March 31, 2008 ceremony that took place in the Mandalay Bay Resort & Convention Center in Las Vegas before the start of APEX 2008.
Industry News | 2012-03-09 16:13:42.0
Seika Machinery will highlight its new, innovative products at the upcoming SMTA Indiana Expo & Trade Forum.
Detailed Product Description Brand: JUKI Part Name: Conveyor PCB Part Number: 40007373 40007374 Machine: FX1R,2050 Condition: Original Used Origin: Japan 40007374 JUKI Conveyor PCB For FX1R Surface Mounting Machine P/N 40007373 Original Part
Detailed Product Description Brand: JUKI Part Name: Hard Disk Part Number: 40047579 Machine: FX3 Machine Condition: New Origin: China 40047579 FX3 HDD ASM JUKI Hard Disk with software For JUKI FX3 Machine Detail Information: 1, Part Name: H
Technical Library | 2020-04-14 15:49:38.0
The number of through-hole components on printed circuit boards (PCB) has declined significantly over the last decade. Miniaturization in electronics has resulted in less THT (through-hole technology) and leads with a finer pitch. For this reason, the soldering of these components has also changed from wave soldering to Point-to-point selective soldering. Soldering these small, fine-pitch components is a challenge when surface mount components (SMD) are positioned very close to THT components on the PCB layout. This study, done in cooperation with a large automotive EMS customer, defines the process windows for through-hole technology for fine-pitch components. It determines what is feasible to solder and defines layout design parameter that make soldering possible with SMD areas and other components on the assembly.
Technical Library | 2020-04-14 15:56:32.0
This paper will focus on the application requirements of solder printing small aperture designs, concentrating on 008004 (inch) / 0201 (metric) size components, and the results of a design of experiment printing these challenging apertures. As Moore's law continues to be applied to component miniaturization, the next installment of reduced packaging has arrived in the form of the 008004/0201 for resistors and capacitors. Component size roughly the size of a grain of sand presents specific challenges to the solder printing process. To address these challenges, each aspect of the printing process will need be examined. This includes essential machine requirements, including correct squeegee blades, tooling support, and calibrations, to meet the demanding specifications. The correct match and design of materials will be addressed, focusing on the stencil and substrate design along with solder paste and cleaning solvent requirements. A design of experiment will be reviewed that applies the machine and materials discussed, including the printer and Solder Paste Inspection (SPI) setup and the specific machine parameters used. The results of these DOE's will then be closely examined.
00363170-01 Double wrenches 30 x 32 00363266-03 VALVE WITH CABLE ADJUSTING UNIT 1 00363267-03 SWITCH WIDTH ADJUSTMENT 1 00363268-02 BERO ADJUSTING UNIT 1 00363269-02 LIMIT SWITCH WIDTH ADJ. 1 WITH CABLE 00363270-03 VALVE WITH CABLE WIDTH ADJ. 2
Nutek NTM3101XL PCB Inverter Late model PCB Inverter (180°) for “double-sided” process. CEE ID: 6289 Status: Available Read Details PCT 323 SMT Transfer Conveyor A 1 meter transfer conveyor with dual belt sections, independant belt speed control, and
. Excellent low volume printer for single or DOUBLE sided PCB. This is the popular semi automatic model, the larger size capable of 29 X 29 STENCILS
Products, Services, Training, and Consulting for the assembly, rework & repair of electronic assemblies. BGA process experts. Manufacturers Rep & Sole Agent in North America for Shuttle Star BGA Rework Stations.
1750 Mitchell Ave.
Oroville, CA USA
Phone: (888) 406-2830