Electronics Forum | Thu Feb 17 16:25:20 EST 2022 | mihai_voivod
I'm not understanding what roller with closed sides you are referring to. My edge roller bearing (brass color) has a lip on the side. The middle roller bearings (silver) have a slightly bigger lip. These are the roller bearing shown on the manufact
Electronics Forum | Tue Jul 09 15:55:36 EDT 2019 | alpha1
Have you checked the bearing on the linear slide bearing on the CTA?
Electronics Forum | Wed Sep 12 13:11:50 EDT 2007 | nitro
Usually the bearings lock up. I keep one spare blower on hand and change it out when I have one go bad, then take the bad one apart and change the bearings. The bearings are about $4.00 per set and are pretty common. Not too hard to find. I am using
Electronics Forum | Sun Oct 09 08:28:04 EDT 2005 | davef
First, no one knows very much about the relaibility of Pb-free assemblies, much less Pb-free solder with Pb-bearing components. Second, we do know that Pb-free components work with PB-bearing solder. Third, based on comparison laboratory testing,
Electronics Forum | Wed Oct 17 09:34:51 EDT 2007 | actech
Jon, I looked it up woth NSK thats the name on it. A rep had to talk to the factory and found out it's a discontinued part. simular bearing sell between $ 80.00 and $120.00 some sell as sets two bearing and one slide , some sell just bearing, NSK
Electronics Forum | Thu Dec 09 23:26:26 EST 2010 | jeffr
Philips (Yamaha) use a non standard NSK Ball screw and nut assembly. You should buy the genuine ball screw from your agent as the series of Ball screws used on these machines are the "NSK Super Precision series" which is not stocked by linear guide s
Electronics Forum | Tue Feb 04 21:49:29 EST 2003 | Bach Huss
We have TCM 3000 in house. The problem is we have alot of nozzle bypass (up-down) problem due to the miniature stroke bearing looses it's librication or dust collected in the bearings. Anyone has any idea what grease or lubricant that can be applied
Electronics Forum | Sun Oct 09 04:59:49 EDT 2005 | olas
Which is the risk in soldering lead bearing components in a lead-free board with a lead-free paste? Is the reliability of the PWA seriously endangered or not? I have many lead-bearing components in my inventory and I don't know if I will be able to
Electronics Forum | Tue Sep 19 11:27:29 EDT 2006 | lheiss
We just purchased a Converted 4c and I've noticed that the linear bearings have what appear to be grease fittings on them. There is also a significant amount of what appears to be automotive type grease on the slides. The X axis got stuck and I cle
Electronics Forum | Thu Feb 26 10:38:00 EST 2015 | swag
We don't have parts around anymore but I can offer a tip that might help. Our conceptronic is gone but the major issue we had with it was bearings going out on blowers. We rebuilt them in-house. Found a high temp. bearing through a bearing supplie
