Industry Directory | Manufacturer
Established in 2000, Sigma CNC Technology Machinery Co., Ltd. is a newly emerged manufacturer of various Machining Centers, such as Double Column Machining Center.
Eumach Co., Ltd. founded in 1988. The products Emach produce are 5 axis machining center, vertical horizontal machining center, universal milling machine and bridge type machining center.
Bridge Type Image measuring machine Instrument features: 1.Adopt high precision grantie structure, never deformation,high stablility and high end good looking . 2.Adopted high-precision optical granite structure ,high resolution color charge-c
Mechanism And Application Characteristics Of One-button fast Measuring Instrument: 1. Applicable scope of the instrument: One-button fast measuring instrument can be applied to all kinds of mobile phones, hardware, plastics, electronics, connectors,
Electronics Forum | Mon Dec 17 12:06:58 EST 2007 | pjc
5 Steps to Eliminate Bridges: 1. Establish (wave) Parallelism First and foremost, you must establish board-to-wave parallelism. This is the prerequisite to any wave solder process control. For an understanding of the power of this approach go to ht
Electronics Forum | Mon Dec 17 11:55:08 EST 2007 | chef
I recently had the same problems, solder bridges on every thing I made, different customers boards, etc. I wave with no-clean flux. As I sorted out problems (pin holes, blow holes, splatter, etc.) I found a lot of variable factors. I changed flux,
Used SMT Equipment | SPI / Solder Paste Inspection
Vintage: 2008 Description: 3D Solder Paste Inspection Details: • 3D sensing system w/ built-in fiducial camera and lighting • MicroPad Sensor • Mechanical board stop • Auto-width adjust conveyor • Max PCB width: 20” x 20” • Max inspection
Used SMT Equipment | AOI / Automated Optical Inspection
OMRON AOI VT-S720-A MACHINE Hardware Configuration Image signal input unit Main unit Power supply Air Camera Illumination Image resolution Feed method Line height PCB carrier width adjustment Ambient operating temperature Ambient opera
Industry News | 2003-03-11 08:45:00.0
CAMtastic DXP is the latest version of Altium's complete CAM verification and editing system that bridges the gap between PCB design and manufacturing and facilitates communication between board designers, fabrication engineers, and their clients.
Industry News | 2020-02-25 12:51:11.0
MIRTEC will exhibit at the SMTA Dallas and Houston Expo & Tech Forums. The Dallas Expo is scheduled to take place Tuesday, March 24, 2020 at the Plano Event Center in Plano, TX, and the Houston Expo will be held Thursday, March 26, 2020 at The Stafford Centre in Stafford, TX.
Parts & Supplies | Pick and Place/Feeders
We can supply FUJI NXT/NXT II/NXT III/XPF/AIMEX feeders: 4MM W04b / W04f 8MM W08 / W08b / W08c / W08f / W08n 12MM W12 / W12c 16MM W16 / W16c 24MM W24 / W24c 32MM W32 / W32c 44MM W44 /
Parts & Supplies | Pick and Place/Feeders
12MM W12 / W12c 16MM W16 / W16c 24MM W24 / W24c 32MM W32 / W32c 44MM W44 / W44c 56MM W56 / W56c 72MM W72 88MM W88 Also Single Stick Feeders Vibratory Stick Feeders Ro
Technical Library | 2020-05-07 03:46:27.0
The selective soldering process has evolved to become a standard production process within the electronics assembly industry, and now accommodates a wide variety of through-hole component formats in numerous applications. Most through-hole components can be easily soldered with the selective soldering process without difficulty, however some types of challenging components require additional attention to ensure optimum quality control is maintained. Several high thermal mass components can place demands on the selective soldering process, while the use of specialized solder fixtures and/or pallets often places an additional thermal demand on the preheating process. Fine-pitch through-hole components and connectors place a different set of demands on the selective soldering process and typically require special attention to lead projection and traverse speed to minimize bridging between adjacent pins. Dual in-line memory module (DIMM) connectors, compact peripheral component interface (cPCI) connectors, coax connectors and other high thermal mass components as well as fine-pitch microconnectors,can present challenges when soldered into backplanes or multilayer printed circuit board assemblies. Adding to this challenge, compact peripheral component interface connectors can present additional solderability issues due to their beryllium copper termination pins.
Technical Library | 2022-08-08 15:06:06.0
Selective soldering has evolved to become a standard production process within the electronics assembly industry, and now accommodates a wide variety of through-hole component formats in numerous applications. Most through-hole components can be easily soldered with the selective soldering process without difficulty however some types of challenging components require additional attention to ensure that optimum quality is maintained. Several high thermal mass components can place demands on the selective soldering process, while the use of specialized solder fixtures, or solder pallets, often places additional thermal demand on the preheating process. Fine-pitch through-hole components and connectors place a different set of demands on the selective soldering process and typically require special attention to lead projection and traverse speed to minimize bridging between adjacent pins. Dual in-line memory module (DIMM) connectors, compact peripheral component interface (cPCI) connectors, coax connectors and other high thermal mass components as well as fine-pitch microconnectors, can present challenges when soldered into backplanes or multilayer printed circuit board assemblies. Adding to this challenge, compact peripheral component interface connectors can present additional solderability issues because of their beryllium copper base metal pins. Key Terms: Selective soldering, drop-jet fluxing, sustained preheating, flux migration, adjacent clearance, lead-to-hole aspect ratio, lead projection, thermal reliefs, gold embrittlement, solderability testing.
https://www.ascen.ltd/Products/PCB_board_assembly_system/vision_measurin/507.html Vision Measuring Machine and image measuring instrument can be used for dimensional accuracy measurement of various molds, aircraft, automobile, mobile phone, computer,
https://www.ascen.ltd/Products/PCB_board_assembly_system/vision_measurin/507.html Vision Measuring Machine and image measuring instrument can be used for dimensional accuracy measurement of various molds, aircraft, automobile, mobile phone, computer,
Training Courses | | | PCB Inspection Courses
The PCB inspection courses focus on improving PCB yield and reliability through validation and detection of defects on electronics assemblies.
Training Courses | | | IPC-7711/7721 Specialist (CIS)
The Certified IPC-7711/7721 Specialist (CIS) training focuses on rework of electronic assemblies and repair and modification of printed boards and electronic assemblies.
Events Calendar | Sun Sep 27 00:00:00 EDT 2020 - Thu Oct 01 00:00:00 EDT 2020 | Rosemont, Illinois USA
SMTA International 2020 Conference & Exhibition
Heller Industries Inc. | https://hellerindustries.com/parts/484444/
484444 - K-TYPE COLOR-INDEXED THERMOCOUPLES- RIGID MICRO-MINI T/C BRIDGE - E51-0386-64 ECD Phone 1-973-377-6800 Company About News Events New Equipment Convection Reflow Ovens Reflow Oven MK7 -New
PCB Libraries, Inc. | https://www.pcblibraries.com/POD/Default.asp?M=ALLEGRO&PN=A3946KLP
! customer login required - 1 credit Status: Active Mounting Type: Surface Mount Logical Description: IC, Half-Bridge Power MOSFET Controller Physical Description: Small Outline Pkg (SOP with Tab), 0.65 mm pitch; 16 pin, 5.00 mm L X 4.40 mm W X
.gif)
